(812) 309-78-59
(495) 223-46-76
ASTM A1003/A1003M-14
Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
9 стр.
Заменен
Электронный (pdf)Печатное издание
82,84 $ (включая НДС 18%)
Разработчик:
Зарубежные/ASTM
ICS:
77.140.50 Flat steel products and semi-products. Including plate, sheet and strip / Стальной листовой прокат и полуфабрикаты. Включая плиты, листы и полосы
Сборник (ASTM):
01.06 Coated Steel Products / Стальная продукция с покрытием
Тематика:
Steel--Structural, Tubes, Plate, Coated
Описание
Реферат

This specification covers metallic-coated, painted metallic-coated, and painted nonmetallic-coated steel sheet used in the manufacture of cold-formed framing members, such as, but not limited to, studs, joists, purlins, girts, and track. The steel sheet is available in the following designations: Structural Grade 50 Type H (ST50H), Structural Grade 340 Type H [ST340H], Structural Grade 40 Type H (ST40H), Structural Grade 275 Type H [ST275H], Structural Grade 37 Type H (ST37H), Structural Grade 255 Type H [ST255H], Structural Grade 33 Type H (ST33H), Structural Grade 230 Type H [ST230H], Structural Grade 50 Type L (ST50L), Structural Grade 340 Type L [ST340L], Structural Grade 40 Type L (ST40L), Structural Grade 275 Type L [ST275L], Structural Grade 37 Type L (ST37L), Structural Grade 255 Type L [ST255L], Structural Grade 33 Type L (ST33L), Structural Grade 230 Type L [ST230L], Nonstructural Grade 33 (NS33), and Nonstructural Grade 230 [NS230]. The ordered thickness shall be the base metal thickness. The base metal shall conform to the chemical composition requirements prescribed for carbon, manganese, phosphorus, sulfur, copper, nickel, chromium, molybdenum, vanadium, columbium, and titanium, as determined by heat and product analyses. Mechanical and corrosion tests shall be performed as prescribed. The base metal shall also conform to the mechanical property requirements including yield strength, tensile strength, and elongation. Coating requirements such as coating weight [mass], corrosion standard, thickness, flexibility and adhesion, are specified.

Область применения

1.1 Thisspecification covers coated steel sheet used in the manufacture ofcold-formed framing members, such as, but not limited to, studs,joists, purlins, girts, and track.

1.2 Thesteel sheet used for cold-formed framing members includesmetallic-coated, painted metallic-coated, or paintednonmetallic-coated.

1.3 Thevalues stated in either inch-pound or SI units shall be regardedseparately as standard. Within the text, SI units are shown inbrackets. The values stated in each system are not exactequivalents; therefore, each system shall be used independently ofthe other.

1.4Unless the order specifies the “M” designation [SI units], theproduct shall be furnished to inch-pound units.

1.5 Thetext of this specification references notes and footnotes, whichprovide explanatory material. These notes and footnotes, excludingthose in tables and figures, shall not be considered asrequirements of this specification.

Ключевые слова:
metallic-coated steel sheet; steel framing members—cold-formed; steel products—metallic-coated; steel sheet;;