This specification covers vacuum-treated carbon and alloy steel forgings for turbine rotors and shafts. Materials shall be manufactured and treated by: melting process via basic electric-furnace; secondary melting process via electrode-electroslag or vacuum-arc remelting; vacuum degassing; forging process via hot mechanical working; heat treatment via double-normalizing and tempering, or normalizing, quenching and tempering; and rough machining and axial boring. Tension and impact tests shall be done to evaluate the conformance of steel forgings with the following mechanical properties: tensile strength and toughness, notch toughness, yield strength, elongation, and reduction of area. Chemical composition conformances shall also be assessed by heat and product analyses. Nondestructive tests, such as ultrasonic and internal examination, and stability tests shall also be performed. Retreatments may be executed one or more times, but not more than three additional times, if results of the mechanical tests do not conform to specified requirements.