(812) 309-78-59
(495) 223-46-76
ASTM A537/A537M-95(2000)
Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
3 стр.
Заменен
Электронный (pdf)Печатное издание
84.24 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
77.140.50 Flat. Including plate, sheet and strip / Стальной листовой прокат и полуфабрикаты. Включая плиты, листы и полосы
Сборник (ASTM):
01.04 Steel--Structural, Reinforcing, Pressure Vessel, Railway / Сталь - Конструкционная, арматурная, для сосудов под давлением, рельсовая
Тематика:
Steel--Structural, Tubes, Plate, Coated
Описание
Область применения

1.1 This specification covers heat-treated carbon-manganese-silicon steel plates intended for fusion welded pressure vessels and structures.

1.2 Material under this specification is available in the following three classes:

Yield Tensile
Strength, Strength,
HeatThickness,min, ksimin, ksi
Class Treatment[MPa][MPa]
1 Normalized 21/2 in. and under[65 mm and under] 50 [345] 70 [485]
Over 21/2 to 4 in.[Over 65 to 100 mm] 45[310]65[450]
2Quenched and tempered21/2 in. and under[65 mm and under]60 [415]80 [550]
Over 21/2 to 4 in.[Over 65 to 100 mm] 55[380]75[515]
Over 4 to 6 in.[Over 100 to 150 mm]46[315]70[485]
3Quenched and tempered21/2 in. and under[65 mm and under]55 [380]80 [550]
Over 21/2 to 4 in.[Over 65 to 100 mm]50[345] 75[515]
Over 4 to 6 in.[Over 100 to 150 mm] 40[275] 70[485]

1.3 The maximum thickness of plates furnished under this specification is 4 in. [100 mm] for Class 1 and 6 in. [150 mm] for Class 2 and Class 3.

1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

Ключевые слова:
carbon steel plate; pressure containing parts; pressure vessel steels; steel plates for pressure vessel application