(812) 309-78-59
(495) 223-46-76
ASTM A802/A802M-95(2010)
Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
3 стр.
Заменен
Печатное изданиеЭлектронный (pdf)
84.24 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
77.140.80 Iron and steel castings / Чугунные и стальные отливки
Сборник (ASTM):
01.02 Ferrous Castings; Ferroalloys / Стальное литье, Ферросплавы
Тематика:
Steel--Structural, Tubes, Plate, Coated
Описание
Реферат

This practice covers the standard acceptance criteria for the determination of surface texture, surface roughness, and surface discontinuities of steel castings by visual examination. The acceptance levels utilize the Steel Castings Research and Trade Association (SCRATA) graded reference comparators described as follows: Level A for surface texture, Level B for nonmetallic inclusions, Level C for gas porosity, Level D for solidification discontinuities, Level E for sand expansion discontinuities, Level F for metal inserts, Level G for thermally cut surfaces, Level H for mechanically prepared surfaces, and Level J for welded surfaces.

Область применения

1.1 This practice covers the acceptance criteria for the surface inspection of steel castings by visual examination. Four levels of acceptance standards are provided.

1.2 Acceptance levels utilize Steel Castings Research and Trade Association (SCRATA) graded reference comparators for the visual determination of surface texture, surface roughness, and surface discontinuities described as follows:
Acceptance levels

ASurface Texture

BNonmetallic Inclusions

CGas Porosity

DSolidification Discontinuities

ESand Expansion Discontinuities

FMetal Inserts

GThermally Cut Surfaces

HMechanically Prepared Surfaces

JWelded Surfaces

1.3 Descriptions of terms related to casting discontinuities are in Section 2.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Ключевые слова:
steel castings; surface acceptance standards; visual; Castings; Chill testing; Classification (standards)--metals/alloys; Discontinuities--steel; Expansion; Fusion; Inclusions; Linear changes/linearity--metals/alloys; Microstructures; Nonmetallic inclusions; Porosity; Rating system; Reference photographs; Roughness; Shrinkage; Steel castings; Surface analysis--metals/alloys; Visual examination--steel; Welded steel castings--specifications