(812) 309-78-59
(495) 223-46-76
ASTM B115-10
Standard Specification for Electrolytic Copper Cathode
Стандартные технические условия на электролитический медный катод
9 стр.
Заменен
Печатное изданиеЭлектронный (pdf)
96.72 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
77.150.30 Copper products / Продукция из меди
Сборник (ASTM):
02.01 Copper and Copper Alloys / Медь и сплавы из меди
Тематика:
Copper
Описание
Значение и использование

Calculated values shall be rounded to the desired number of places as directed in Practice E29.

Реферат

This specification establishes the requirements for electrolytic copper cathode; electrorefined and electrowon. The cathode furnished shall conform to the chemical composition requirements specified. Cathodes shall withstand ordinary handling without breakage or excessive separation of nodules. They shall be substantially free of all foreign material; for example, copper sulfate, dirt, grease, and oil. Electrical resistivity of the cathodes shall be determined as the mean of results from four specimens.

Область применения

1.1 This specification establishes the requirements for electrolytic copper cathode; electrorefined and electrowon.

1.2 UnitsThe values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Note 1—Cathode produced to this specification corresponds to the designation Cath as defined in Classification B224 and may be used to produce all other coppers listed in Classification B224 that are normally produced from Cath copper.

Note 2—Grade 1 cathode conforms to the chemical compositional requirements of Copper UNS No. C11040, except for oxygen, and is suitable for the manufacture of wire rod as designated in Specification B49.

1.3 The following hazard caveat applies to the test methods described in Annex A2 of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Ключевые слова:
cathode; copper; electrolytic copper; electrorefined copper; electrowon copper; Antimony content--Cu/Cu alloys; Arsenic content; Bismuth content; Cathode copper (electrolytic); Chemicals; Composition analysis; Copper (electrolytic); Iron content--copper; Lead content--metals; Nickel content--Cu/Cu alloys; Sampling nonferrous metals/alloys; Selenium content; Specimen preparation (general); Spectrometry; Sulfur--Cu/Cu alloys; Tellurium content--Cu/Cu alloys; Tin content--Cu/Cu alloys