(812) 309-78-59
(495) 223-46-76
ASTM B124/B124M-09
Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
5 стр.
Заменен
Печатное изданиеЭлектронный (pdf)
96.72 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
77.150.30 Copper products / Продукция из меди
Сборник (ASTM):
02.01 Copper and Copper Alloys / Медь и сплавы из меди
Тематика:
Copper
Описание
Реферат

This specification establishes the requirements for copper (UNS Nos. C11000, C14500, and C14700) and copper alloy (UNS Nos. C36500, C37000, C37700, C46400, C48200, C48500, C61900, C62300, C63000, C63200, C64200, C64210, C65500, C67500, C67600, C69300, C70620, C71520, and C77400) forging rods, bars, and shapes. The material for manufacture shall be a cast rod, bar, or billet of such purity and soundness as to be suitable for processing by hot working, cold working, and annealing to produce a uniform wrought structure in the finished product. Products shall be produced in tempers H50 (extruded and drawn), M20 (as hot rolled), and M30 (as hot extruded). Products shall be tested and shall adhere to dimensional (diameter, thickness, width, length, shape, and straightness), mechanical, and chemical composition requirements.

Область применения

1.1 This specification establishes the requirements for copper and copper alloy rod, bar, and shapes intended for hot forging. The following coppers and copper alloys are involved:

Copper UNS Nos.
Copper Alloy UNS Nos.
C11000C36500
C14500C37000
C14700C37700
C46400
C48200
C48500
C61900
C62300
C63000
C63200
C64200
C64210
C65500
C67500
C67600
C69300
C70620
C71520
C77400
C87700
C87710
C27450


Note 1—Additional information about forging practice and forgings produced from these alloys is given in Appendix X1 and in Specification B283.

1.2 UnitsThe values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Ключевые слова:
bar; brass; brass forging shapes; bronze; brass forgings; bronze forging shapes; copper; copper alloy; copper alloy forgings; copper alloy forging rod; copper alloy forging bar; copper alloy forging shapes; copper forging rod; copper forging bar; copper forging shapes; copper forgings; copper nickel; copper nickel forging rod; copper nickel forgings; hot forging; hot forging stock; nickel silver; nickel silver forging shapes; nickel silver forgings; rod; shapes; UNS Alloy No. C27450; UNS Alloy No. C36500; UNS Alloy No. C37000; UNS Alloy No. C37700; UNS Alloy No. C46400; UNS Alloy No. C48200; UNS Alloy No. C48500; UNS Alloy No. C61900; UNS Alloy No. C62300; UNS Alloy No. C63000; UNS Alloy No. C63200; UNS Alloy No. C64200; UNS Alloy No. C64210; UNS Alloy No. C65500; UNS Alloy No. C67500; UNS Alloy No. C67600; UNS Alloy No. C69300; UNS Alloy No. C70620; UNS Alloy No. C71520; UNS Alloy No. C77400; UNS No. C11000; UNS No. C14500; UNS No. C14700; UNS No. C87700; UNS No. C87710; Aluminum bronzes--specifications; Aluminum-silicon bronze--specifications; Brass forgings; Brass plate/sheet/strip/rolled bar; Brass rod/bar/shapes--specifications; Bronze--forgings; Bronze rod/bar/shapes--specifications; Copper alloy forgings--specifications; Copper alloy rod/bar/shapes--specifications; Copper rod/bar/shapes--specifications; Hot forging; Muntz metal (leaded); Silicon bronze--specifications; UNS C11000--rod/bar/shapes; UNS C14500 (phosphorus deoxidized copper, tellurium bearing); UNS C14700 (sulfur-bearing copper); UNS C36500 (leaded Muntz metal, uninhibited); UNS C37700 (forging brass); UNS C46400 (naval brass, uninhibited); UNS C48200 (naval brass, medium leaded); UNS C48500 (naval brass, high leaded); UNS C61900 (aluminum bronze); UNS C62300 (aluminum bronze); UNS C63000 (aluminum bronze); UNS C63200 (aluminum bronze); UNS C64200 (aluminum bronze); UNS C64210 (aluminum-silicon bronze); UNS C65500 (high silicon bronze A); UNS C67500 (manganese bronze A); UNS C77400 (nickel silver)