(812) 309-78-59
(495) 223-46-76
ASTM B135-10
Standard Specification for Seamless Brass Tube
6 стр.
Заменен
Печатное изданиеЭлектронный (pdf)
96.72 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
23.040.15 Non-ferrous metal pipes / Трубы из цветных металлов
Сборник (ASTM):
02.01 Copper and Copper Alloys / Медь и сплавы из меди
Тематика:
Copper
Описание
Реферат

This specification covers seamless round and rectangular including square copper alloy tube in straight lengths. The tempers of drawn tube shall be designated as light-drawn, drawn, and hard-drawn. Light-drawn temper shall be used only when a tube of some stiffness but yet capable of being bent is needed. Drawn temper, which is most commonly used where there is no specific requirement for high strength on the one hand, shall be utilized for general purposes and or for bending qualities on the other. Hard-drawn temper shall be used only where there is need for a tube as strong as is commercially feasible for the sizes indicated. For any combination of diameter and wall thickness not covered under hard-drawn temper, the values given for drawn temper shall be used. Expansion test shall be performed on the rounded tube and shall show no cracking or rupture visible to the unaided eye. Both annealed and drawn tempers shall withstand, after proper cleaning, an immersion in standard mercurous nitrate solution for a certain amount of time without cracking. Materials shall then be removed from the solution and shall be wiped free of excess mercury and shall then be examined for cracks. The specimen shall undergo the eddy-current testing which is the standard nondestructive test. The specimen shall undergo the pneumatic test which subjects the tube to an internal air pressure making sure that it must not show evidence of leakage. The test method used shall provide for easy visual detection of any leakage, such as by immersion of the tube under water or by the pressure differential method. Annealed tube shall be either bright annealed or acid cleaned after final annealing operations.

Область применения

1.1 This specification covers seamless round and rectangular including square copper alloy tube in straight lengths. Ten alloys are specified having the following nominal compositions:

Ключевые слова:
brass tube; seamless brass tube; seamless tube; Brass pipe/tube--specifications; Seamless Cu/Cu alloy tube--specifications; UNS C22000--tube (seamless/welded); UNS C23000--pipe/tube (seamless/welded); UNS C26000--tube; UNS C27000 (yellow brass, 65%); UNS C27200 (brass); UNS C27400 (yellow brass, 63 %); UNS C28000 (Muntz metal, 60 %); UNS C33000 (low leaded brass); UNS C33200 (high leaded brass); UNS C37000 (free-cutting Muntz metal); UNS C44300 (admiralty, arsenical); Yellow brass