(812) 309-78-59
(495) 223-46-76
ASTM B390-92(2006)
Standard Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides (Withdrawn 2010)
4 стр.
Отменен
Электронный (pdf)Печатное издание
84.24 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
77.160 Powder. Including sintered metal materials and hardmetals / Порошковая металлургия
Сборник (ASTM):
02.05 Metallic and Inorganic Coatings; Metal Powders and Metal Powder Products / Металлические и неорганические покрытия, Металлические порошки, изделия из металлического порошка
Тематика:
Metallic Coatings (inorganic)
Описание
Причина отмены

This practice for the visual comparison and classification of the apparent grain size and distribution of cemented tungsten carbides was limited to cemented tungsten carbides that contain approximately 6, 10, and 18 % cobalt.

Formerly under the jurisdiction of Committee B09 on Metal Powders and Metal Powder Products, this practice was withdrawn in September 2010. This practice was withdrawn without replacement since it has shown little use in the industry. Also, all of the photomicrographs needed to be replaced with photomicrographs with micron markers, which would be difficult to reproduce.

Значение и использование

The apparent size and distribution of tungsten carbide grains in cemented carbides affects the material’wear resistance and fracture. For a given chemical composition, an increase in the average grain size will result in increased toughness and decreased wear resistance. This practice illustrates representative micro-structures for a wide range of tungsten carbide-cobalt grades. This is not intended to be used as a specification for carbide grades; producers and users may use the micrographs and the grain size chart as a guide in developing their own specifications.

Область применения

1.1 This practice for the visual comparison and classification of the apparent grain size and distribution of cemented tungsten carbides is limited to cemented tungsten carbides that contain approximately 6, 10, and 18 % cobalt.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Ключевые слова:
apparent grain size; cemented carbides; cemented tungsten carbides; grain size distribution; hardmetals; microstructure; powder metallurgy