(812) 309-78-59
(495) 223-46-76
ASTM B391-03
Standard Specification for Niobium and Niobium Alloy Ingots
3 стр.
Заменен
Печатное изданиеЭлектронный (pdf)
84.24 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
77.150.99 Other products of non-ferrous metals / Продукция из цветных металлов прочая
Сборник (ASTM):
02.04 Nonferrous Metals – Nickel, Titanium, Lead, Tin, Zinc, Zirconium, Precious, Reactive, Refractory Metals and Alloys: Materials for Thermostats, Electrical Heating and Resistance Contact, and Connectors / Цветные металлы - Никель, Кобальт, Свинец, Олово, Цинк, Кадмий, Драгоценные металлы, химически активные металлы, Тугоплавкие металлы и сплавы, Материалы для Термостатов, Электронагревательных приборов, Контактов, Соединительные устройств
Тематика:
Other Nonferrous Metals
Описание
Реферат

This specification covers unalloyed and alloyed niobium ingots prepared by vacuum- or plasma-arc melting or electron-beam melting to produce consolidated metal for processing to various mill shapes. The materials covered by this specification are R04200-Type 1 which is a reactor grade unalloyed niobium, R04210-Type 2 which is a commercial grade unalloyed niobium, R04251-Type 3 which is a reactor grade niobium alloy, and R04261-Type 4 which is a commercial grade niobium alloy. The ingot metal for all four types shall be vacuum or plasma arc melted, vacuum electron-beam melted, or any combination of these three methods. The materials shall conform to the required chemical composition for carbon, nitrogen, oxygen, hydrogen, zirconium, tantalum, iron, silicon, tungsten, nickel, molybdenum, hafnium, titanium, boron, aluminum, beryllium, chromium, and cobalt. The ingots shall also conform to the required maximum Brinell hardness.

Область применения

1.1 This specification covers unalloyed and alloyed niobium ingots prepared by vacuum- or plasma-arc melting or electron-beam melting to produce consolidated metal for processing to various mill shapes.

Note 1—Committee B10 has adopted "niobium" as the designation for Element No. 41, formerly named "columbium."

1.2 The materials covered by this specification are:

1.2.1 R04200-Type 1—Reactor grade unalloyed niobium,

1.2.2 R04210-Type 2—Commercial grade unalloyed niobium,

1.2.3 R04251-Type 3—Reactor grade niobium alloy containing 1 % zirconium, and

1.2.4 R04261-Type 4—Commercial grade niobium alloy containing 1 % zirconium.

1.3 Unless a single unit is used, for example force for hardness testing in kN, the values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

1.4 The following precautionary caveat pertains only to the test method portions of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Ключевые слова:
niobium; niobium alloy ingots