(812) 309-78-59
(495) 223-46-76
ASTM B671-81(2010)
Standard Specification for Refined Iridium
Стандартная спецификация на рафинированный иридий
2 стр.
Заменен
Электронный (pdf)Печатное издание
84.24 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
77.120.99 Other non-ferrous metals and their alloys / Цветные металлы и их сплавы прочие
Сборник (ASTM):
02.04 Nonferrous Metals – Nickel, Titanium, Lead, Tin, Zinc, Zirconium, Precious, Reactive, Refractory Metals and Alloys: Materials for Thermostats, Electrical Heating and Resistance Contact, and Connectors / Цветные металлы - Никель, Кобальт, Свинец, Олово, Цинк, Кадмий, Драгоценные металлы, химически активные металлы, Тугоплавкие металлы и сплавы, Материалы для Термостатов, Электронагревательных приборов, Контактов, Соединительные устройств
Тематика:
Other Nonferrous Metals
Описание
Реферат

This specification covers refined iridium as sponge and powder in two grades, Grade 99.80 (UNS PO6100) and Grade 99.90. The metal may be produced by any refining process. They shall conform to the required chemical composition for iridium, rhodium, platinum, palladium, ruthenium, lead, silicon, tin, zinc, arsenic, bismuth, cadmium, iron, silver, gold, copper, nickel, and chromium. The sampling procedures shall consist of sponge lot and powder lot.

Область применения

1.1 This specification covers refined iridium as sponge and powder in two grades as follows:

1.1.1 Grade 99.80 (UNS PO6100)Iridium having a purity of 99.80 %.

1.1.2 Grade 99.90Iridium having a purity of 99.90 %.

Note 1—For the purposes of determining conformance with this specification, an observed value obtained from analysis shall be rounded to the nearest unit in the last right-hand place of figures used in expressing the limiting value, in accordance with the rounding method of Practice E29.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Ключевые слова:
iridium; refined iridium; sponge; Iridium; Refined metals--specifications; Sponge; UNS P06100 (refined iridium - 99.80 % grade)