(812) 309-78-59
(495) 223-46-76
ASTM B723-00(2009)
Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe
3 стр.
Заменен
Печатное изданиеЭлектронный (pdf)
84.24 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
23.040.15 Non-ferrous metal pipes / Трубы из цветных металлов
Сборник (ASTM):
02.04 Nonferrous Metals – Nickel, Titanium, Lead, Tin, Zinc, Zirconium, Precious, Reactive, Refractory Metals and Alloys: Materials for Thermostats, Electrical Heating and Resistance Contact, and Connectors / Цветные металлы - Никель, Кобальт, Свинец, Олово, Цинк, Кадмий, Драгоценные металлы, химически активные металлы, Тугоплавкие металлы и сплавы, Материалы для Термостатов, Электронагревательных приборов, Контактов, Соединительные устройств
Тематика:
Other Nonferrous Metals
Описание
Реферат

This specification covers nickel-chromium-molybdenum-cobalt-tungsten-iron-silicon (UNS N06333) wrought alloy welded pipe. Pipe shall be manufactured from flat-rolled alloy by an automatic welding process with no additional filler metal. The material shall conform to the composition required by the specification. The pipe shall be subjected to chemical, tensile, yield, elongation, hardness, flattening, and nondestructive tests. Nondestructive test includes pressure and electric testing, although not required by the specification.

Область применения

1.1 This specification covers wrought alloy UNS N06333 in the form of welded pipe intended for heat-resisting applications and general corrosive service.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriated Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Ключевые слова:
UNS N06333; welded pipe; Nickel alloy pipe--specifications; Nickel-chromium alloys--specifications; Nickel-chromium-molybdenum-cobalt-tungsten-iron-silicon alloy--specifications; UNS N06333 (Ni-Cr alloy, RA 333); Welded Ni/Ni alloy pipe--specifications; Corrosive service applications--pipe (Ni/Ni alloy); High-temperature service applications--nickel (specifications)