(812) 309-78-59
(495) 223-46-76
ASTM B800-05(2011)
Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical PurposesAnnealed and Intermediate Tempers
5 стр.
Заменен
Печатное изданиеЭлектронный (pdf)
96.72 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
29.060.10 Wires. Including electric rods, busbars, etc. / Провода. Включая стержни, шины и т.д.
Сборник (ASTM):
02.03 Electrical Conductors / Электрические проводники
Тематика:
Electrical and Magnetic Conductors, Electrical Contacts
Описание
Реферат

This specification covers 800 series aluminum alloys fabricated into round wires in annealed or intermediate tempers suitable for stranding into conductors or for solid single conductors, usually to be insulated. The wire shall be made from drawing stock meeting the chemical composition limits for aluminum, silicon, iron, copper, magnesium, zinc, and boron. The wire shall be free of imperfections and shall conform to specified values for tensile strength, elongation, and electrical resistivity. The specified values for the density of aluminum alloys and wire diameter, shall be taken for the calculation of mass and cross sections. Joints may be made in drawing stock and in the wire prior to final drawing, or during final drawing or in the finished wire by electrical-butt welding, cold-pressure welding, or by electric-butt, cold-upset welding. Details for each kind of test and measurement method (tensile strength test, resistivity measurement, diameter measurement, surface-finish inspection) are discussed thoroughly.

Область применения

1.1 This specification covers 8000 series aluminum alloys fabricated into round wires in annealed or intermediate tempers suitable for stranding into conductors or for solid single conductors, usually to be insulated.

1.2 The SI values for resistivity are regarded as standard. For all other properties, the inch-pound units are regarded as standard and the SI units may be approximate.

Note 1—Aluminum alloys capable of meeting the requirements of this specification are listed in Table 1.

Note 2—The alloy and temper designations conform to ANSI H35.1. Unified Numbering System alloy designations are listed in Table 1 in accordance with Practice E527.

Note 3—Certain aluminum alloys may be subject to patent rights. U.S. patents numbers are shown in Table 1.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

TABLE 1 Aluminum Alloys

Alloy DesignationU.S. Patent Number
ANSI-H35.1 UNS
8017A98017...
8030A98030 3711339
8076 A98076 3697260
8130 A98130 ...
8176 A98176 RE 28419
RE 30465
8177A98177 ...
Ключевые слова:
8000-series aluminum alloy conductors ; aluminum alloy conductors; aluminum conductors; electrical conductors; solid aluminum conductors: Aluminum electrical conductors--specifications; Annealed aluminum materials; Solid aluminum conductors; UNS A98017 (Wr. alum alloy, non-heat treatable); UNS A98030 (Wr. alum alloy, non-heat treatable); UNS A98076 (Wr. alum alloy, non-heat treatable); UNS A98130 (Wr. alum alloy, non-heat treatable); UNS A98176 (Wr. alum alloy, non-heat treatable); UNS A98177 (Wr. alum alloy, non-heat treatable)