(812) 309-78-59
(495) 223-46-76
ASTM C889-11
Standard Test Methods for Chemical and Mass Spectrometric Analysis of Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder
Стандартные методы испытаний для химического и масс-спектрометрического анализа порошка оксида гадолиния (Gd2O3) ядерного сорта
3 стр.
Заменен
Печатное изданиеЭлектронный (pdf)
84.24 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
27.120.30 Fissile. Including raw materials / Делящиеся ядерные вещества. Включая сырье
Сборник (ASTM):
12.01 Nuclear Energy (I) / Ядерная энергия (I)
Тематика:
Nuclear Technology
Описание
Значение и использование

Gadolinium oxide powder is used, with subsequent processing, in nuclear fuel applications, such as an addition to uranium dioxide. These test methods are designed to determine whether the material meets the requirements described in Specification C888.

The material is analyzed to determine whether it contains the minimum gadolinium oxide content specified.

The loss on ignition and impurity content are determined to ensure that the weight loss and the maximum concentration limit of specified impurity elements are not exceeded.

Область применения

1.1 These test methods cover procedures for the chemical and mass spectrometric analysis of nuclear-grade gadolinium oxide powders to determine compliance with specifications.

1.2 The analytical procedures appear in the following order:

Sections
Carbon by Direct CombustionThermal Conductivity
C1408 Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method
Total Chlorine and Fluorine by Pyrohydrolysis Ion
Selective Electrode
C1502 Test Method for Determination of Total Chlorine and Fluorine in Uranium Dioxide and Gadolinium Oxide
Loss of Weight on Ignition7-13
Sulfur by CombustionIodometric Titration
Impurity Elements by a Spark-Source Mass Spectrographic
C761 Test Methods for Chemical, Mass Spectrometric, Spectrochemical,Nuclear, and Radiochemical Analysis of Uranium Hexafluoride
C1287 Test Method for Determination of Impurities In Uranium Dioxide By Inductively Coupled Plasma Mass Spectrometry
Gadolinium Content in Gadolinium Oxide by Impurity
Correction
14-17

1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 5.

7.1 This test method covers the loss-on-ignition of volatile constituents from nuclear-grade gadolinium oxide (Gd2O3) powder.

14.1 The percent gadolinium oxide content of powders, exclusive of volatiles, is determined by calculation after the material has been analyzed to determine the total impurities.

Ключевые слова:
Fluoride content; Carbon content--nuclear materials; Chlorine content--nuclear materials/applications; Fluorine content--nuclear materials/applications; Gadolinia; Gadolinium oxide powder (nuclear grade); Impurities--nuclear materials; Loss on ignition (LOI); Pyrohydrolysis ion-selective electrode method; Spark-source mass spectrometry; Spectrochemical analysis; Sulfur--nuclear materials