(812) 309-78-59
(495) 223-46-76
ASTM D1394-76(2014)
Standard Test Methods for Chemical Analysis of White Titanium Pigments
7 стр.
Заменен
Печатное изданиеЭлектронный (pdf)
96.72 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
87.060.10 Pigments and extenders / Пигменты и разбавители
Сборник (ASTM):
06.03 Paint –– Pigments, Polymers, Resins, Naval Stores, Cellulosic Esters, and Ink Vehicles / Красители – Пигменты, Быстровысыхающие масла, Полимеры, Смолы, Канифольно-скипидарные продукты, Целлюлозный полимер, Связующее вещества для красок
Тематика:
Paints & Related Coatings
Описание
Реферат

These test methods cover procedures for the chemical analysis of white titanium dioxide pigments. The analytical procedures appear in the following order: sample preparation, qualitative analysis, moisture content determination, total titanium content determination by Jones Reductor and Aluminum Reduction methods, aluminum oxide content determination, and silica content determination. The reagents to be used shall include ammonium hydroxide, ammonium sulfate, hydrochloric acid, hydrogen peroxide, hydrogen sulfide, sulfuric acid, tartaric acid, tin, zinc, carbon steel, iron, ferric sulfate solution, nitric acid, sodium oxalate, potassium permanganate, aluminum metal foil, ammonium thiocyanate indicator solution, ferritic ammonium sulfate solution, sodium bicarbonate solution, sulfuric acid, titanium dioxide, acetic acid, ammonium phosphate, EDTA solution, methyl orange indicator solution, sodium bisulfate monohydrate, sodium fluoride, xylenol orange indicator solution, and zinc sulfate solution.

Область применения

1.1 These test methods cover procedures for the chemical analysis of white titanium dioxide pigments.

1.2 The analytical procedures appear in the following order:

 

Sections

Preparation of Sample

4

Qualitative Analysis

5 and 6

Moisture

7

Total Titanium:

 

 Jones Reductor Method

8 – 12

 Aluminum Reduction Method

13 – 17

Aluminum Oxide

18 – 22

Silica

23 – 29

1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. A specific hazard statement is given in Section 19.

Ключевые слова:
aluminum oxide; aluminum reduction; chemical analysis; Jones Reductor; titanium pigment;