(812) 309-78-59
(495) 223-46-76
ASTM D1417-10
Standard Test Methods for Rubber Latices-Synthetic
Стандартные методы испытаний синтетических каучуковых латексов
11 стр.
Заменен
Электронный (pdf)Печатное издание
107.64 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
83.040.10 Latex and raw rubber / Латекс и сырой каучук
Сборник (ASTM):
09.01 Rubber, Natural and Synthetic –– General Test Methods; Carbon Black / Каучук, Натуральный и Синтетический - Общие методы испытаний, Технический углерод
Тематика:
Rubber
Описание
Реферат

These test methods cover the synthetic rubber lattices ABR, BR, CR, IIR, NBR, NCR, NIR, PBR, PSBR, SBR, SCR, SIR, synthetic rubber lattices with substituted carboxylic acid groups on the polymer chain, and reinforced synthetic rubber lattices. Covered tests include the procedure for collecting samples and determining total solid content, volatile unsaturates content, pH, surface tension, viscosity, coagulum, bound styrene, Mooney viscosity, mechanical stability, polystyrene reinforcement in contained polymer, and residual acrylonitrile content. Each test method contains information on material exceptions, apparatus, and test procedures.

Область применения

1.1 These test methods cover test procedures for synthetic rubber latices ABR, BR, CR, IIR, IR, NBR, NCR, NIR, PBR, PSBR, SBR, SCR, SIR, synthetic rubber latices having substitute carboxylic acid (COOH) groups on the polymer chain (X), and synthetic rubber latices that are reinforced (Y). Exceptions to the above are noted in the individual test procedures. The test methods include procedures for sampling, and for determining total solids, volatile unsaturates (residual styrene), pH value, surface tension, viscosity, coagulum, bound styrene, Mooney viscosity, mechanical stability, polystyrene reinforcement in contained polymer, and residual acrylonitrile content.

Note 1—The nomenclature used in these test methods is in accordance with Practice D1418.

1.2 The values stated in SI units are to be regarded as standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Ключевые слова:
latex; rubber latices; synthetic; Acidity, alkalinity, pH--rubber materials/applications; Chemical analysis--rubber chemicals/materials; Coagulum content; Mechanical stability; Mooney viscosity testing; Natural rubber (NR) latex; Solids content; Styrene content; Surface analysis--rubber chemicals/materials; Synthetic rubber; Tensile properties/testing--rubber/related materials; Viscometers--Mooney; Viscosity--rubber