(812) 309-78-59
(495) 223-46-76
ASTM D1568-05(2014)
Standard Test Methods for Sampling and Chemical Analysis of Alkylbenzene Sulfonates (Withdrawn 2023)
7 стр.
Отменен
Электронный (pdf)Печатное издание
106.08 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
71.080.15 Aromatic hydrocarbons / Ароматические углеводороды
Сборник (ASTM):
15.04 Soaps and Other Detergents; Polishes; Leather; Resilient Floor Coverings / Мыло и другие моющие средства; Полировальные материалы; Кожа; Эластичные покрытия для полов
Тематика:
Soaps, Polishes
Описание
Причина отменыThese test methods covered the sampling and chemical analysis of paste, powder, or liquid detergent alkylbenzene sulfonates.

Formerly under the jurisdiction of Committee D12 on Soaps and Other Detergents, this practice was withdrawn in January 2023 in accordance with section 10.6.3 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.

Реферат

These test methods cover the sampling and chemical analysis of paste, powder, or liquid detergent alkylbenzene sulfonates. Reagent grade chemicals shall be used in all tests. The distillation method shall be preferred for moisture testing. Water by the Karl Fischer titration method shall be used when the amount of moisture is low. Total matter insoluble in alcohol, neutral oil content, chlorides calculated as sodium chloride, and pH shall also be tested.

Область применения

1.1 These test methods cover the sampling and chemical analysis of paste, powder, or liquid detergent alkylbenzene sulfonates.

1.2 The procedures for sampling and analysis appear in the following order:

 

Sections

 

 

Sampling:

 

 Powders and Flakes Packed in Cans or Cartons

3

 Powders and Flakes in Bulk

4

 Liquids

6

 Pastes

7

Hazards

8

Preparation of Sample

9

Moisture:

 

 Distillation Method

11 – 14

 Karl Fischer Method

15 – 20

Total Matter Insoluble in Alcohol

21 – 23

Neutral Oil

24 – 27

Chlorides Calculated as Sodium Chloride (NaCl)

28 – 31

pH

32


1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For a specific hazards statement, see Section 8.

Ключевые слова:
alkylbenzene sulfonates; chemical analysis; sampling