(812) 309-78-59
(495) 223-46-76
ASTM D1742-06
Standard Test Method for Oil Separation from Lubricating Grease During Storage
5 стр.
Заменен
Печатное изданиеЭлектронный (pdf)
96.72 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
75.100 Lubricants,. Including mineral oils, fluids for metal working and for temporary protection against corrosion / Смазки, индустриальные масла и связанные с ними продукты. Включая минеральные масла, жидкости для обработки металлов и для временной защиты от коррозии
Сборник (ASTM):
05.01 Petroleum Products, Liquid Fuels, and Lubricants (I): C1234–D3709 / Нефтепродукты, жидкое топливо и смазочные материалы (I): C1234–D3709
Тематика:
Petroleum
Описание
Значение и использование

When a lubricating grease separates oil, the remaining composition increases in consistency. This can affect the ability of the product to function as designed.

It has been found that the results of this test correlate directly with the oil separation that occurs in 35-lb pails of grease during storage.

This test method is not intended to predict oil separation tendencies of the grease under dynamic conditions.

Область применения

1.1 This test method covers the determination of the tendency of a lubricating grease to separate oil during storage in both normally filled and partially filled containers.

1.2 This test method is not suitable for greases softer than NLGI No. 1 grade.

1.3 The values stated in SI units are to be regarded as standard, except for the dimensions in and , where inch-pound units are standard.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For a specific hazard statement, see .

Ключевые слова:
lubricating grease; oil bleed; oil separation