(812) 309-78-59
(495) 223-46-76
ASTM D2325-68(2000)
Standard Test Method for Capillary-Moisture Relationships for Coarse- and Medium-Textured Soils by Porous-Plate Apparatus (Withdrawn 2007)
6 стр.
Заменен
Печатное изданиеЭлектронный (pdf)
93.60 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
93.020 Earthworks. Including geotechnics / Земляные работы. Выемка грунта. Сооружение фундаментов. Подземные работы. Включая геотехнику
Сборник (ASTM):
04.08 Soil and Rock (I): D420 – D5876 / Грунт и Горные породы (I): D420 – D5876
Тематика:
Geotechnical Engineering
Описание
Причина отмены

This test method covers the determination of capillary-moisture relationships for coarse- and medium-textured soils as indicated by the soil-moisture tension relations for tensions between 10 and 101 kPa (0.1 and 1 atm).

Formerly under the jurisdiction of Committee D18 on Soil and Rock, this test method was withdrawn in September 2007 and replaced by Test Methods D 6386 for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge.

For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards volume information, refer to the standard's Document Summary page on the ASTM website.

Область применения

1.1 This test method covers the determination of capillary-moisture relationships for coarse- and medium-textured soils as indicated by the soil-moisture tension relations for tensions between 10 and 101 kPa (0.1 and 1 atm). Under equilibrium conditions, moisture tension is defined as the equivalent negative gage pressure, or suction, corresponding to a soil moisture content. This test method determines the equilibrium moisture content retained in a soil subjected to a given soil-water tension. This test method is not suitable for very fine-textured soils.

Note 1--For determination of capillary-moisture relationships for fine-textured soils, refer to Test Method D3152.

1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Ключевые слова:
capillary-moisture; porous-plate; soil