(812) 309-78-59
(495) 223-46-76
ASTM D2823/D2823M-05(2011)e1
Standard Specification for Asphalt Roof Coatings, Asbestos Containing (Withdrawn 2014)
2 стр.
Отменен
Печатное изданиеЭлектронный (pdf)
84.24 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
91.100.50 Binders. Including geomembranes, asphalts for buildings, etc. / Связующие вещества. Уплотнители. Включая геомембраны, строительный асфальт и т.д.
Сборник (ASTM):
04.04 Roofing and Waterproofing / Кровельные покрытия и Гидроизоляционные материалы
Тематика:
Roofing
Описание
Причина отмены

This specification covered asbestos-containing asphalt roof coatings of brushing or spraying consistency.

Formerly under the jurisdiction of Committee D08 on Roofing and Waterproofing, this specification was withdrawn in May 2014. This standard is being withdrawn without replacement due to its limited use by industry.

Реферат

This specification covers two types of asbestos-containing asphalt roof coatings consisting of an asphalt base, volatile petroleum solvents, and mineral stabilizers including asbestos fiber, mixed to a smooth, uniform consistency suitable for application by squeegee, three-knot brush, paint brush, roller, or by spraying. Type I is made from asphalts characterized as self-healing, adhesive, and ductile, while Type II is made from asphalts characterized by high softening point and relatively low ductility. The coatings shall comply with specified composition limits of water, nonvolatile matter, asbestos and other mineral stabilizers, asphalt, and mineral matter based on original mass of insoluble residue. They shall also adhere to physical requirements as to uniformity, consistency, and pliability and behavior at given temperatures.

Область применения

1.1 This specification covers asbestos-containing asphalt roof coatings of brushing or spraying consistency.

1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Ключевые слова:
asbestos; asphalt; fibered; roof coating; Nonvolatile matter content; Pliability; Roofing materials/applications--specifications; Stormer method; Heating tests--asphalts; Asphalt roofing materials--specifications; Consistency--asphalts