(812) 309-78-59
(495) 223-46-76
ASTM D4684-99e1
Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
7 стр.
Заменен
Печатное изданиеЭлектронный (pdf)
96.72 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
75.100 Lubricants,. Including mineral oils, fluids for metal working and for temporary protection against corrosion / Смазки, индустриальные масла и связанные с ними продукты. Включая минеральные масла, жидкости для обработки металлов и для временной защиты от коррозии
Сборник (ASTM):
05.02 Petroleum Products, Liquid Fuels, and Lubricants (II): D3711–D6122 / Нефтепродукты, жидкое топливо и смазочные материалы (II): D3711–D6122
Тематика:
Petroleum
Описание
Область применения

1.1 This test method covers the measurement of the yield stress and viscosity of engine oils after cooling at controlled rates over a period exceeding 45 h to a final test temperature between -15 and -35°C. The viscosity measurements are made at a shear stress of 525 Pa over a shear rate of 0.4 to 15 s -1 .

1.2 The applicability to petroleum products other than engine oils has not been determined.

1.3 This test method uses the millipascal second (mPa[dot]s) as the unit of viscosity. For information, the equivalent centipoise unit is shown in parentheses.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Ключевые слова:
low temperature flow properties; low temperature viscosity; min-rotary viscometer; pumping viscosity; viscosity yield stress