(812) 309-78-59
(495) 223-46-76
ASTM D5144-00
Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants
5 стр.
Заменен
Печатное изданиеЭлектронный (pdf)
93.60 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
27.120.10 Reactor engineering / Реакторная техника
Сборник (ASTM):
06.02 Paint –– Products and Applications; Protective Coatings; Pipeline Coatings / Красители – Продукты и их применение; Защитные покрытия; Покрытия для трубопровода
Тематика:
Paints & Related Coatings
Описание
Область применения

1.1 This guide provides a common basis on which protective coatings for the surfaces of light water-moderated nuclear power generating facilities may be qualified and selected by reproducible evaluation tests. This standard also provides guidance for application and maintenance of protective coatings. Under the environmental operating and accident conditions of nuclear power generation facilities, encompassing Pressurized Water Reactors (PWR's) and Boiling Water Reactors (BWR's), coating performance may be affected by exposure to any one, all, or a combination of the following conditions:ionizing radiation; contamination by radioactive nuclides and subsequent decontamination processes; chemical and water sprays; high-temperature high-pressure steam; and abrasion or wear.

1.2 The content of this guide includes:

Section Referenced Documents 2 Terminology 3 Significance and Use 4 Preparation of Test Specimens 5 Radiation Resistance 6 Decontamination 7 Physical Properties 8 Chemical Resistance 9 Fire Evaluation 10 DBA Testing 11 Surface Preparation, Coating Application, and Inspection for 12 Shop and Field Work Quality Assurance 13 Keywords 14

1.2.1 In addition, this guide addresses technical topics within ANSI N5.12 and ANSI N101.2 that were covered by separate ASTM standards, for example, surface preparation, shop and field and coating application, and shop and field.

1.2.2 Applicable sections of this guide and specific acceptance criteria may be incorporated into specifications and other documents where appropriate.

1.3 This standard does not purport to address all of the safetyconcerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Ключевые слова:
ANSI replacement standards; decontamination; Design Basis Accident (DBA); nuclear power plants; protective coating standards; qualification testing; quality assurance Service Level I, Service Level II, and Service Level III, radiation; safety related