(812) 309-78-59
(495) 223-46-76
ASTM D5478-98
Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
5 стр.
Заменен
Печатное изданиеЭлектронный (pdf)
93.60 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
17.060 Measurement. Including measuring instruments / Измерение объема, массы, плотности, вязкости. Включая измерительные приборы
Сборник (ASTM):
06.01 Paint –– Tests for Chemical, Physical, and Optical Properties; Appearance / Красители – Испытания на Химические, Физические и Оптические свойства; Внешний вид
Тематика:
Paints & Related Coatings
Описание
Область применения

1.1 These test methods cover the measurement of the viscosity of Newtonian and non-Newtonian liquids. These test methods are applicable to liquids having viscosities in the range from 5 X 10 -4 to 10 Pa[dot]s (0.5 to 10 cP). The shear rate range is dependent upon the needle used and viscosity of the liquid and may vary from 10 -4 to 10 s -1 .

1.2 The yield stress of liquids having this property may also be determined.

1.3 These test methods consist of determining liquid viscosities of Newtonian and non-Newtonian fluids (clear or opaque) by measuring the steady-state (constant) or terminal velocities of cylindrical needles as they fall through the test liquid under the influence of gravity. Yield stresses of non-Newtonian liquids may be measured using the same procedure.

Ключевые слова:
falling needle viscometer; Newtonian fluid; non-Newtonian fluid; rheological property; rheometer; viscometer; viscosity; yield stress