(812) 309-78-59
(495) 223-46-76
ASTM D5798-10
Standard Specification for Fuel Ethanol (Ed70-Ed85) for Automotive Spark-Ignition Engines
7 стр.
Заменен
Электронный (pdf)Печатное издание
96.72 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
75.160.20 Liquid. Including gasoline, diesel, kerosene, etc. / Жидкое топливо
Сборник (ASTM):
05.02 Petroleum Products, Liquid Fuels, and Lubricants (II): D3711–D6122 / Нефтепродукты, жидкое топливо и смазочные материалы (II): D3711–D6122
Тематика:
Petroleum
Описание
Реферат

This specification covers a fuel blend, nominally 75 to 85 volume % denatured fuel ethanol (Ed75-Ed85) and 25 to 15 additional volume % hydrocarbons for use in ground vehicles with automotive spark-ignition engines. Fuel ethanol (Ed75-Ed85) shall conform to the performance requirements prescribed. Fuel ethanol (Ed75-Ed85) shall be visually free of sediment and suspended matter. The hydrocarbon/aliphatic ether blend content, vapour pressure, acidity, pH requirements, gum content, inorganic chloride, water requirements, copper requirements, and sulphur requirements shall be tested to meet the requirements prescribed.

Область применения

1.1 This specification covers a fuel blend, nominally 70 to 85 volume % denatured fuel ethanol and 30 to 15 additional volume % hydrocarbons for use in ground vehicles with automotive spark-ignition engines. Appendix X1 discusses the significance of the properties specified.

1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

Ключевые слова:
acidity; alcohol; automotive spark-ignition engine fuel; chloride; copper corrosion; ether; fuel ethanol (Ed70-Ed85) for automotive spark-ignition engines; hydrocarbon; inorganic chloride; lead; MTBE; oxidation stability; oxygenates; pHe; phosphorus; solvent washed gum content; sulfur; vapor pressure; volatility; water; Automotive engine fuels/oils--specifications; Ethanol; Fuel ethanol (Ed70-Ed85); Petroleum products--specifications