(812) 309-78-59
(495) 223-46-76
ASTM D946/D946M-15
Standard Specification for Penetration-Graded Asphalt Binder for Use in Pavement Construction
2 стр.
Заменен
Печатное изданиеЭлектронный (pdf)
84.24 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
93.080.20 Road. Including asphalts, road pavements, etc. / Дорожно-строительные материалы. Включая асфальт, дорожные покрытия и т.д.
Сборник (ASTM):
04.03 Road and Paving Materials; Vehicle–Pavement Systems / Материалы для покрытия и мощения дорог, Дорожно-транспортные системы
Тематика:
Road & Paving
Описание
Реферат

This specification covers the standard for asphalt cement proposed for use in the construction of pavements. This specification shall include the following penetration grades: 40-50, 60-70, 85-100, 120-150, and 200-300. The cements shall be manufactured by refining crude petroleum through suitable methods. The asphalt cement shall be homogeneous and shall not foam when heated to application temperature. Requirements such as ductility, flash point, solubility in trichloroethylene, and penetration shall be determined in accordance with ASTM test methods.

Область применения

1.1 This specification covers asphalt binder for use in the construction of pavements.

Note 1: For asphalt binders graded by viscosity at 60°C, see Specification D3381. For performance-graded asphalt binder, see Specification D6373.

1.2 This specification covers the following penetration grades:

40–50,

120–150, and

60–70,

200–300.

 85–100,

 

1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

Ключевые слова:
asphalt binder; pavement; penetration;