(812) 309-78-59
(495) 223-46-76
ASTM E1359-12
Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies
8 стр.
Заменен
Печатное изданиеЭлектронный (pdf)
96.72 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
19.100 Non-destructive. Including testing equipment: industrial apparatus for X-ray and gamma radiography, penetrant flaw detectors, etc. / Неразрушающие испытания. Включая испытательное оборудование: промышленная аппаратура для рентгеновской и гамма-радиографии, проникающие дефектоскопы и т.д., 03.120.20 Product. Including laboratory accreditation and audit programmes and auditing / Сертификация продукции и фирм. Оценка соответствия. Включая аккредитацию лабораторий, программы аудита и проведение аудита
Сборник (ASTM):
03.03 Nondestructive Testing (I): C1331 – E2373 / Неразрушающий контроль (I): C1331 – E2373
Тематика:
Nondestructive Testing
Описание
Значение и использование

3.1 The use of this survey form will provide the auditor with a guide for evaluating an agency.

3.1.1 The description of the agency's facility and its organization will aid the auditor in determining if the agency has adequate capacity and capability to fulfill the contractual requirement.

3.1.2 A review of the agency's policies and/or practices will aid the auditor in determining if the agency has adequate controls on its system.

3.1.3 A review of the agency's records will aid the auditor in determining if the facility complies with its own written policies or practices, or both.

3.2 The recommendations set forth in this guide are minimums and should be supplemented by the user, as necessary, to meet the specific requirements of the contract.

3.3 The use of this survey form provides the auditor with a permanent record and includes a corrective action request.

Область применения

1.1 This guide establishes areas for review and provides a survey form that can be used in determining the competence of a nondestructive testing agency.

1.1.1 Criteria from Practices E543, E1212, and ASNT SNT-TC-1A, ANSI/ASNT CP-189, and NAS-410, were used in the preparation of this guide.

1.2 Areas for review should include, but are not limited to, the following: description of the agency, its facilities and organization; documentation of policies or practices, or both, including a) contract review, b) equipment calibration, and c) personnel qualifications.

1.3 The use of SI or inch-pound units, or combinations thereof, will be the responsibility of the technical committee whose standards are referred to in this standard.

Ключевые слова:
agency; equipment; facilities; personnel; quality assurance; survey