Formerly under the jurisdiction of Committee F01 on Electronics, this test method was withdrawn in January 2023 in accordance with section 10.6.3 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.
Значение и использование4.1 This testing is performed to determine the electrical contact reliability under switching conditions and the physical changes caused by mechanical actuation of the switch assembly in the environments in which the assemblies operate. Evidence of deterioration, that is, cracking of substrate, domes both metal and polyester, ink delamination, etc., resulting from this test can at times be determined by visual examination. However, the effects may be more readily ascertained by measurements made prior to, during, and after exposure. Total circuit resistance, force-displacement, dielectric strength, insulation resistance, and capacitance are types of measurements that show the deleterious effects due to exposure.
1.1 This test method covers the setup, procedure, and apparatus required to depress and release a membrane switch to a predetermined number of cycles.
1.2 This test method also covers the optional use of specified voltage and current during the cycling of the membrane switch.
1.3 This test method can be used in conjunction with other ASTM standards such as Test Method F1596.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.