(812) 309-78-59
(495) 223-46-76
ASTM F1580-07
Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants
4 стр.
Заменен
Печатное изданиеЭлектронный (pdf)
84.24 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
77.120.50 Titanium and titanium alloys / Титан и титановые сплавы11.040.40 Implants. Including pacemakers / Имплантаты для хирургии, протезирования и ортоптики. Включая кардиостимуляторы
Сборник (ASTM):
13.01 Medical and Surgical Materials and Devices (I): E667 – F2477 / Медицинские и хирургические материалы и приборы (I): E667 - F2477
Тематика:
Medical Devices & Implants
Описание
Реферат

This specification covers the chemical, particle size, and cleanliness requirements for unalloyed titanium and titanium-6aluminum-4vanadium alloy powders for use as coatings, formed by sintering or thermal spraying techniques, onto titanium alloy surgical implants. The powders may be manufactured by the plasma rotating electrode, inert gas atomization, or hydride-dehydride process, or other method capable of producing powder meeting the requirements of this specification. This specification addresses only the powder requirements, and not the properties of the coatings formed from them.

Область применения

1.1 This specification covers the requirements for unalloyed titanium and Ti-6Al-4V alloy powders for use in fabricating coatings on titanium alloy implants.

1.2 Powders covered under this specification may be used to form coatings by sintering or thermal spraying techniques.

1.3 This specification covers powder requirements only. It does not address properties of the coatings formed from them.

1.4 Finely divided titanium powder may be considered pyrophoric and should be handled in accordance with the appropriate guidelines.

Ключевые слова:
coatings; metallic; metals (for surgical implants titanium alloys); orthopaedic medical devices (titanium/titanium alloys); powder; porous coatings; titanium/titanium alloys (for surgical implants)