(812) 309-78-59
(495) 223-46-76
ASTM F1788-97(2003)
Standard Guide for In-Situ Burning of Oil Spills on Water: Environmental and Operational Considerations
6 стр.
Заменен
Электронный (pdf)Печатное издание
96.72 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
13.060.10 Water of natural resources / Вода естественных источников
Сборник (ASTM):
11.08 Pesticides, Antimicrobials, and Alternative Control Agents; Hazardous Substances and Oil Spill Response / Пестициды, противомикробные препараты и альтернативные средства контроля; Влияние опасных веществ и разлива нефти
Тематика:
Environmental Toxicology
Описание
Значение и использование

This guide is primarily intended to aid decision-makers and spill-responders in contingency planning, spill response, and training.

This guide is not specific to either site or type of oil.

Область применения

1.1 This guide covers the use of in-situ burning to assist in the control of oil spills on water. This guide is not applicable to in-situ burning of oil on land.

1.2 The purpose of this guide is to provide information that will enable spill responders to decide if burning will be used as part of the oil spill cleanup response.

1.3 This is the general guide only. It is assumed that conditions at the spill site have been assessed and that these conditions are suitable for the burning of oil. It is also assumed that permission to burn the oil has been obtained. Variations in the behavior of different oil types are not dealt with and may change some of the parameters noted in this guide.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Ключевые слова:
fire-resistant booms; in-situ burning; oil-spill burning; oil-spill containment; oil-spill disposal