(812) 309-78-59
(495) 223-46-76
ASTM F2045-00(2011)
Standard Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, Tubular Glass/Plastic
8 стр.
Заменен
Печатное изданиеЭлектронный (pdf)
96.72 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
47.020.99 Other standards related to shipbuilding and marine structures / Судостроение и морские сооружения, прочие аспекты
Сборник (ASTM):
01.08 Ships and Marine Technology (II): F1546 – latest / Судоходные и Морские Технологии (II): с F1546 и далее
Тематика:
Steel--Structural, Tubes, Plate, Coated
Описание
Реферат

This specification covers the requirements for direct and indirect reading sight liquid level indicators for general applications. General applications for indirect reading sight glasses are water and fuel service at working pressures 2.07 MPa (300 lb/in.2) and below, temperatures of 149°C (300°F) and below. Direct reading sight glass indicators may consist of glass or plastic tubes with fittings including shutoff valves. Glass tubes may be used for low shock direct reading sight glass indicators in which the fluid is not compatible with plastic. Indirect reading indicators may consist of a sealed chamber with a magnetic float or flag indicator. Indicator designs are classified as either direct reading or indirect reading. Qualification testing and quality conformance testing shall be performed to meet the requirements prescribed.

Область применения

1.1 This specification covers the requirements for direct and indirect reading sight liquid level indicators for general applications. General applications for indirect reading sight glasses are water and fuel service at working pressures 2.07 MPa (300 lb/in.2) and below, temperatures of 149°C (300°F) and below. General applications for direct reading sight glasses are applications in which the temperature does not exceed 66°C (150°F).

1.2 Direct reading sight glass indicators may consist of glass or plastic tubes with fittings including shutoff valves. Glass tubes may be used for low shock direct reading sight glass indicators in which the fluid is not compatible with plastic.

1.3 Indirect reading indicators may consist of a sealed chamber with a magnetic float or flag indicator.

1.4 Special requirements for naval shipboard applications are included in the supplement to this standard.

1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

Ключевые слова:
direct level indicator; indirect level indicator; liquid level indicator; sight glass; Electrical power systems--specifications; Direct-reading indicators; Liquid level-indicating electrical equipment; Marine systems/subsystems/equipment--specifications; Sight indicators; Tubular glass/plastic reading indicators