(812) 309-78-59
(495) 223-46-76
ASTM F2113-01(2007)
Standard Guide for Analysis and Reporting the Impurity Content and Grade of High Purity Metallic Sputtering Targets for Electronic Thin Film Applications
2 стр.
Заменен
Печатное изданиеЭлектронный (pdf)
84.24 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
29.045 Semiconducting materials / Полупроводниковые материалы
Сборник (ASTM):
10.04 Electronics; Declarable Substances in Materials; 3D Imaging Systems; Additive Manufacturing Technologies / Электроника; Декларируемые вещества в материалах; Системы 3D-визуализации; Аддитивные технологии производства
Тематика:
Electronics
Описание
Реферат

This guide covers sputtering targets used as thin film source material in fabricating semiconductor electronic devices. It should be used to develop target specifications for specific materials. This standard sets purity grade levels, analytical methods and impurity content reporting method and format. The grade designation is a measure of total metallic impurity content. It does not necessarily indicate suitability for a particular application because factors other than total metallic impurity may influence performance. Analysis for trace metallic impurities and gases shall be performed on samples that represent the finished sputtering target. Carbon, oxygen, and sulfur shall be analysed by fusion and gas extraction/infrared spectroscopy. Nitrogen and hydrogen shall be analysed by fusion and gas extraction.

Область применения

1.1 This guide covers sputtering targets used as thin film source material in fabricating semiconductor electronic devices. It should be used to develop target specifications for specific materials and should be referenced therein.

1.2 This standard sets purity grade levels, analytical methods and impurity content reporting method and format.

1.2.1 The grade designation is a measure of total metallic impurity content. The grade designation does not necessarily indicate suitability for a particular application because factors other than total metallic impurity may influence performance.

Ключевые слова:
electronics; purity analysis; purity grade; sputtering; target; thin film