(812) 309-78-59
(495) 223-46-76
ASTM F2220-15
Standard Specification for Headforms
8 стр.
Заменен
Электронный (pdf)Печатное издание
106.08 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
13.340.20 Head. Including helmets, eye-protectors, hearing protectors, ear muffs, teeth protectors and hoods. / Защитные средства для головы. Включая шлемы, защитные приспособления для глаз, ушные противошумные вкладыши и т.д.
Сборник (ASTM):
15.07 Sports Equipment, Playing Surfaces and Facilities; Pedestrian/Walkway Safety and Footwear; Amusement Rides and Devices; Snow Skiing / Спортивное оборудование, игровые площадки и приспособления; Пешеходная безопасность; Обувная промышленность; Развлекательные аттракционы и механизмы; Лыжный спорт
Тематика:
Sports & Recreation
Описание
Реферат

This specification covers the materials, sizing, and manufacturing details of test headforms for use in the testing of protective headgear. This specification identifies the requirements for five test headform size codes: A, E, J, M, and O. All datum levels shall be quoted relative to the reference plane. The headforms shall be symmetrical about the midsagittal plane. Internal geometry may be defined to satisfy the requirements of the individual test specifications. The impact headforms shall be made of K1A-F magnesium, with the prescribed zirconium and magnesium composition, and shall conform to the specified requirements for: external dimensions, performance (resonant frequency), mass, and center of gravity. All impact headforms shall be marked with: headform size, basic plane, reference plane, and midsagittal (longitudinal) and coronal (transverse) planes through the vertical axis. Other headforms shall be made of material of sufficient strength and stiffness to maintain their geometry during testing and shall comply to the external dimension requirements.

Область применения

1.1 This standard specifies the materials, sizing, and manufacturing details of test headforms for use in the testing of protective headgear. Details of the exterior dimension of the headforms are included.

1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

Ключевые слова:
headform(s); helmet(s); protective headgear;