(812) 309-78-59
(495) 223-46-76
ASTM F2450-09
Standard Guide for Assessing Microstructure of Polymeric Scaffolds for Use in Tissue Engineered Medical Products
10 стр.
Заменен
Печатное изданиеЭлектронный (pdf)
96.72 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
11.100 Laboratory medicine / Лабораторная медицина
Сборник (ASTM):
13.01 Medical and Surgical Materials and Devices (I): E667 – F2477 / Медицинские и хирургические материалы и приборы (I): E667 - F2477
Тематика:
Medical Devices & Implants
Описание
Значение и использование

The ability to culture functional tissue to repair damaged or diseased tissues within the body offers a viable alternative to xenografts or heterografts. Using the patients own cells to produce the new tissue offers significant benefits by limiting rejection by the immune system. Typically, cells harvested from the intended recipient are cultured in vitro using a temporary housing or scaffold. The microstructure of the scaffold, that is, its porosity, the mean size, and size distribution of pores and their interconnectivity is critical for cell migration, growth and proliferation (Appendix X1). Optimizing the design of tissue scaffolds is a complex task, given the range of available materials, different manufacturing routes, and processing conditions. All of these factors can, and will, affect the surface roughness, surface chemistry, and microstructure of the resultant scaffolds. Factors that may or may not be significant variables depend on the characteristics of a given cell type at any given time (that is, changes in cell behavior due to the number of passages, mechanical stimulation, and culture conditions).

Tissue scaffolds are typically assessed using an overall value for scaffold porosity and a range of pore sizes, though the distribution of sizes is rarely quantified. Published mean pore sizes and distributions are usually obtained from electron microscopy images and quoted in the micrometer range. Tissue scaffolds are generally complex structures that are not easily interpreted in terms of pore shape and size, especially in three-dimensions. Therefore, it is difficult to quantifiably assess the batch-to-batch variance in microstructure or to enable a systematic investigation to be made of the role that the mean pore size and pore size distribution has on influencing cell behavior based solely on electron micrographs (Tomlins et al, (1)).

Fig. 1 gives an indication of potential techniques that can be used to characterize the structure of porous tissue scaffolds and the length scale that they can measure. Clearly a range of techniques must be utilized if the scaffold is to be characterized in detail.

The classification and terminology of pore sizes, such as those given in Table 2, has yet to be standardized, with definitions of terms varying widely (as much as three orders of magnitude) between differing applications and industries. Both Table 2 and the supporting detailed discussion included within Appendix X2 describe differences that exist between IUPAC (International Union of Pure and Applied Chemistry) definitions and the common terminology currently utilized within most life science applications, which include both implant and tissue engineering applications..

Since the literature contains many other terms for defining pores (Perret et al (3)), it is recommended that the terms used by authors to describe pores are defined in order to avoid potential confusion. Additionally, since any of the definitions described within Table 2 can shift dependent on the pore size determination method (see Table 1 and Fig. 1), an accompanying statement describing the utilized assessment technique is essential.

All the techniques listed in Table 1 have their limitations for assessing complex porous structures. Fig. 2a and Fig. 2b show a through- and a blind-end pore respectively. Porometry measurements (see 7.4) are only sensitive to the narrowest point along a variable diameter through-pore and therefore can give a lower measure of the pore diameter than other investigative techniques, such as SEM, which may sample at a different point along the pore. The physical basis of porometry depends on the passage of gas through the material. Therefore, the technique is not sensitive to blind-end or enclosed pores. Therefore, estimates of porosity based on porometry data will be different to those obtained from, for example, porosimetry (see 7.3), which is sensitive to both through- and blind-pores or density determinations that can also account for through-, blind-end, and enclosed pores. The significance of these differences will depend on factors such as the percentage of the different pore types and on their dimensions. Further research will enable improved guidance to be developed.

Polymer scaffolds range from being mechanically rigid to those that are soft hydrogels. The methods currently used to manufacture these structures include, but are not limited to:

Casting a polymer, dissolved in an organic solvent, over a water-soluble particulate porogen, followed by leaching.

Melt mixing of immiscible polymers followed by leaching of the water-soluble component.

Dissolution of supercritical carbon dioxide under pressure into an effectively molten polymer, a phenomenon attributed to the dramatic reduction in the glass transition temperature which occurs, followed by a reduction in pressure that leads to the formation of gas bubbles and solidification.

Controlled deposition of molten polymer to produce a well-defined three-dimensional lattice.

The manufacture of three-dimensional fibrous weaves, knits, or non-woven structures.

Chemical or ionic cross-linking of a polymeric matrix.

Considerations have been given to the limitations of these methods in Appendix X1.

This guide focuses on the specific area of characterization of polymer-based porous scaffolds and is an extension of an earlier ASTM guide, Guide F 2150.

TABLE 2 Comparison of Pore Size Nomenclature

DescriptorIUPAC DefinitionsDefinitions for Life Science Applications
For: chemical (for example, solid catalysts);
metallurgy; geology (for example, zeolites) applications
For: tissue engineering; medical implants;
diagnostic or biological filtration applications
Nanopore/nanoporosityNot utilized 0.002 to 0.1 µm (2 to 100 nm)
Micropore/microporosity<2 nm (<20 Å)0.1 to 100 µm (typically defined 0.1 to 20 µm)
Mesopore2 to 50 nm (20 to 500 Å)Not utilized
Macropore/macroporosity>50 nm (>500 Å) >100 μm
CapillariesMeyer, et al. (2)Not utilized
MacrocapillariesMeyer, et al. (2)Not utilized


FIG. 1 A Range of Techniques is Required to Fully Characterize Porous Materials
(NoteFigure redrawn from Meyer (2).)


FIG. 2 A through-pore showing a variation of pore diameter, D (a); and an example of a blind-pore (b).

Область применения

1.1 This guide covers an overview of test methods that may be used to obtain information relating to the dimensions of pores, the pore size distribution, the degree of porosity, interconnectivity, and measures of permeability for porous materials used as polymeric scaffolds in the development and manufacture of tissue engineered medical products (TEMPs). This information is key to optimizing the structure for a particular application, developing robust manufacturing routes, and for providing reliable quality control data.

1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3 This guide does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Ключевые слова:
microstructure; pore size; pore volume; porosity; porous materials; tissue scaffolds; Polymeric scaffolds; Tissue engineered medical products (TEMPs)