(812) 309-78-59
(495) 223-46-76
ASTM F806-99a(2009)
Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials
Стандартный метод испытания для определения сжимаемости и восстановления слоистых композиционных материалов уплотняющих прокладок
3 стр.
Заменен
Печатное изданиеЭлектронный (pdf)
84.24 $ (включая НДС 20%)
Разработчик:
Зарубежные/ASTM
ICS:
21.140 Seals, glands / Уплотнения, сальники
Сборник (ASTM):
09.02 Rubber Products, Industrial – Specifications and Related Test Methods; Gaskets; Tires / Промышленные изделия из каучука - Технические требования и Соответствующие методы испытаний; Уплотнители; Шины
Тематика:
Rubber
Описание
Значение и использование

This test method is designed to compare related laminated composite gasket materials under controlled conditions and their short-time compressibility and recovery at room temperature. It measures compressibility with a matched pair of opposing upper and lower penetrators which provide better precision and bias than methods using an upper penetrator and a lower anvil. It is difficult to prepare undistorted test specimens from laminated composite gasket materials which will lay flat on an anvil. Also, with many composites having rigid inner layers the load on the upper penetrator is distributed over the bottom anvil area resulting in a lower than actual compressibility reading. This test method may be used as a routine test method when agreed upon between the purchaser and the producer.

Область применения

1.1 This test method covers determination of the short-time compressibility and recovery at room temperature of laminated composite gasket materials.

1.2 This test method is not intended as a test for compressibility under prolonged stress application, that is creep, or for recovery following such prolonged stress application, the inverse of which is generally referred to as compression set. Also, it is only intended for tests at room temperature.

1.3 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Ключевые слова:
compressibility; gasket material composites; gasket material laminates; recovery; resiliency; Composite gasket materials; Compression testing--gaskets; Gasketed material composites/laminates; Gaskets; Heating tests--gaskets; Laminated composite gaskets; Loading tests--building constructions/materials; Recovery