(812) 309-78-59
(495) 223-46-76
ÖNORM EN 10219-2:2006-09
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
Заменен
Печатная копияПечатное издание
209.50 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
77.140.75 Steel. Including hollow steel bars and sections for construction / Стальные трубы и трубки специального назначения. Включая полые стальные цилиндрические заготовки и профили
Описание
This part of EN 10219 specifies tolerances for cold formed welded circular, square and rectangular structural hollow sections, manufactured in wall thicknesses up to 40 mm, in the following size ranges: Circular: Outside diameters up to 2 500 mm
Square: Outside dimensions up to 500 mm x 500 mm
Rectangular: Outside dimensions up to 500 mm x 300 mm
The formulae for calculating sectional properties of sections manufactured to the dimensional tolerances of this standard, to be used for the purposes of structural design, are given in Annex B.
Dimensions and sectional properties for a limited range of sizes are given in Annex C.
Technical delivery conditions are specified in EN 10219-1.
NOTE The designation of the sections major axis (yy) and its minor axis (zz) align with the axis designation used for structural design in the structural Eurocodes.
Teil 2 der EN 10219 legt die Anforderungen an die Grenzabmaße und Formtoleranzen von kaltgefertigten geschweißten Hohlprofilen mit kreisförmigem, quadratischem oder rechteckigem Querschnitt für den Stahlbau in Wanddicken bis 40 mm innerhalb folgender Maßbereiche fest: kreisförmige Profile mit einem Außendurchmesser von 20 mm bis 2500 mm; quadratische Profile mit einer Seitenlänge von 20 mm bis 500 mm; rechteckige Profile mit Seitenlängen von 40 mm x 20 mm bis 400 mm x 300 mm. Die Maße und statischen Werte für eine Reihe von Standardabmessungen sind ebenfalls festgelegt. Technische Lieferbedingungen werden in EN 10219-1 angegeben.
Ключевые слова:
Bauwesen,Stahl,geschweißt,Profil,Hohlprofil,Stahlbau,Baustahl,Feinkornbaustahl,Grenzwert,Abmessung,Statik,Form,Toleranz,Tabelle,Berechnung,Bestellung,Abbildung,unlegierter Stahl,Formtoleranz,Prüfung,Pfahlrohr