(812) 309-78-59
(495) 223-46-76
ÖNORM EN 12560-6:2004-03
Flanges and their joints - Gaskets for Class-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges
Действует
Печатная копияПечатное издание
129.89 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
23.040.80 Seals for pipe and hose assemblies / Уплотнения для труб и рукавов в сборе
Описание
This European Standard specifies the construction, dimensions and marking of covered serrated metal gaskets for
use with flanges complying with prEN 1759-1 for Class 150, Class 300, Class 600, Class 900, Class 1500 and
Class 2500 up to and including NPS 24.
This document does not extend to serrated covered metal based heat exchanger gaskets with pass bars or large
vessel gaskets but, in the lack of a dedicated document for such gaskets, the principles set down can be applied to
them.
NOTE 1 Dimensions of other types of gaskets for use with flanges to prEN 1759-1, EN 1759-3 and EN 1759-4 are given in
EN 12560-1, EN 12560-2, EN 12560-3, EN 12560-4, EN 12560- 5 and prEN 12560-7.
NOTE 2 Annex A lists information that should be supplied by the purchaser when ordering gaskets in circumstances where
the choice of the gasket materials appropriate to the service is left to the supplier.
Für Kammprofildichtungen aus metallischem Werkstoff sind die Anforderungen hinsichtlich Maßen, Werkstoffen und Kennzeichnung festgelegt. Diese Dichtungen sind zur Anwendung für Flansche gemäß EN 1759-1 für Class 150, 300, 600, 900, 1500 und Class 2500 und einschließlich NPS 24 vorgesehen. Die Farbkennzeichnung, Bestellhinweise sowie Verpackungsvorschriften sind angegeben.
Ключевые слова:
Armatur, industrielle Armatur, Flansch, Flanschverbindung, Bestellung, Dichtung, Bezeichnung, Abmessung, Stahlflansch, Profildichtung, Kammprofildichtung, Ausführung, Abbildung, Kennzeichnung, Konstruktion, Farbkennzeichnung, Verpackung, Class-Bezeichnung