(812) 309-78-59
(495) 223-46-76
ÖNORM EN 13381-5:2014-12
Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite member
Действует
Печатная копияПечатное издание
196.07 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
13.220.50 Fire-resistance of building materials and elements / Огнестойкость строительных материалов и элементов91.080.01 Structures of buildings in general / Конструкции зданий в целом
Описание
This European Standard specifies a test method for determining the contribution of fire protection systems to the fire resistance of structural concrete/profiled sheet steel composite members or slabs. The concrete can be lightweight, normal-weight or heavy-weight concrete and of strength classes 20/25 (LC/C/HC) to 50/60 (LC/C/HC).
The test method and its assessment procedure are designed to permit direct application of the results to cover a range of thicknesses of the applied fire protection material.
The test method is applicable to all fire protection materials used for the protection of concrete/steel composite members or slab and includes sprayed materials, coatings, cladding protection systems and multi-layer or composite fire protection materials, with or without a cavity between the fire protection material and the concrete/steel composite members or slab.
This European Standard contains the fire test which specifies the tests which will be carried out to determine the ability of the fire protection system to remain coherent and fixed to the composite member and to provide data on the temperatures of the steel sheet, throughout the depth of the concrete (for extended application purposes) and the unexposed surface of the concrete, when exposed to the standard temperature/time curve according to the procedures defined herein.
In special circumstances, where specified in national building regulations, there can be a need to subject reactive protection material to a smouldering curve. The test for this and the special circumstances for its use are detailed in Annex A.
The fire test methodology makes provision for the collection and presentation of data which can be used as direct input to the calculation of fire resistance of concrete/steel composite members in accordance with the procedures given in EN 1994-1-2.
This European Standard also contains the assessment which prescribes how the analysis of the test data needs to be made and gives guidance to the procedures by which interpolation needs to be undertaken.
The limits of applicability of the results of the assessment arising from the fire test are defined, together with permitted direct application of the results to different steel/concrete composite structures, steel types and thicknesses, concrete densities, strengths, thicknesses and production techniques over the range of thicknesses of the applied fire protection system tested.
Feuerwiderstandsfähigkeit von tragenden profilierten Stahlblech/Beton-Verbundkonstruktionen oder Verbundplatten fest. Der Beton kann Leichtbeton, Normalbeton oder Schwerbeton der Festigkeits-klassen 20/25 (LC/C/HC) bis 50/60 (LC/C/HC) sein.
Das Prüfverfahren und sein Beurteilungsverfahren sind so ausgelegt, dass eine direkte Anwendung der Ergebnisse möglich ist, um einen Bereich von Dicken des aufgebrachten Brandschutzmaterials abzudecken.
Das Prüfverfahren gilt für alle Brandschutzmaterialien, die für den Schutz von Stahlblech/Beton-Verbundkonstruktionen oder Verbundplatten verwendet werden und beinhaltet aufgesprühte Brandschutzmaterialien, Bekleidungen, Beschichtungsschutzsysteme sowie Mehrschicht- oder Verbundsysteme mit oder ohne Spalt zwischen dem Brandschutzmaterial und den Stahlblech/Beton-Verbundkonstruktionen oder -platten.
Diese Europäische Norm beinhaltet die Brandprüfung, die die Prüfungen festlegt, die durchgeführt werden, um die Fähigkeit des Brandschutzsystems, zusammenhängend und mit der Verbundkonstruktion fest verbunden zu bleiben, zu bestimmen, und um Messwerte für die Temperaturen des Stahlblechs über die gesamte Tiefe des Betons (für erweiterte Anwendungszwecke) und die unbeflammte Oberfläche des Betons zu liefern, wenn diese der Einheits-Temperaturzeitkurve nach den hier festgelegten Verfahren ausgesetzt werden.
Unter besonderen Umständen, die in nationalen Bauvorschriften festgelegt sind, kann es erforderlich sein, das reaktive Brandschutzmaterial einer Schwelbrandkurve zu unterziehen. Die diesbezügliche Prüfung und die besonderen Umstände für deren Anwendung sind in Anhang A ausführlich beschrieben.
Die Methodologie der Brandprüfung bietet die Möglichkeit, Messwerte zu erfassen und darzustellen, die direkt als Eingangswerte zur Berechnung des Feuerwiderstandes von Stahlblech/Beton-Verbundkonstruktionen entsprechend den Verfahren nach EN 1994-1-2 verwendet werden können.
Diese Europäische Norm beinhaltet ebenfalls die Beurteilung, die vorschreibt, wie die Analyse der Messwerte durchzuführen ist, und enthält Hinweise auf die Verfahren, mit denen die Interpolation durchzuführen ist.
Die Grenzen der Anwendbarkeit der Ergebnisse aus der Beurteilung der Brandprüfung sind gemeinsam mit dem zulässigen direkten Anwendungsbereich der Ergebnisse auf unterschiedliche Stahlblech/Beton-Verbundkonstruktionen, Stahlgüten und Dicken, Betonrohdichten, Festigkeiten, Dicken und Herstellungs-techniken über den Dickenbereich des geprüften Brandschutzsystems festgelegt.
Ключевые слова:
Bestimmungsverfahren, Feuerwiderstand, tragendes Bauteil, Brandschutzmaßnahme, profiliert, Stahlblech-Beton-Verbundkonstruktion, Brandschutzsystem, Begriffe, Terminologie, Prüfeinrichtung, Prüfbedingung, Prüfkonstruktion, Konditionierung, Messeinrichtung, Prüfergebnisse, Prüfbericht, Beurteilung, Bewertungsbericht, Brandverhalten, Bauwesen, Prüfverfahren, Stahlblech, Beton, Verbundkonstruktion, Baustoff, Bauteil, Feuerwiderstandsfähigkeit, Verbundplatte, Brandschutzmaterial, Bekleidung, Beschichtungsschutzsystem, Mehrschichtsystem, Verbundsystem, Brandprüfung, Schwelbrandkurve, Bauvorschrift, Messwert, Interpolation, Stahlgüte, Stahldicke, Betonrohdichte, Festigkeit, Dicke, Herstllungstechnik, Dickenbereich, Prüfofen, Belastungsgerät, Lagerbedingung, Einspannbedingung, Lastbedingung, Probekörper, Prüfmaterial, Druck, Verformung, Ofentemperatur, Prüfergebnis, profiliertes Stahlblech, Beflammungsdauer, Wärmedämmung, Schwelbrand, Heizkurve, Feuchtegehalt