(812) 309-78-59
(495) 223-46-76
ÖNORM EN 13381-8:2010-10
Test methods for determining the contribution to the fire resistance of structural members - Part 8: Applied reactive protection to steel members
Заменен
Печатная копияПечатное издание
192.00 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
13.220.50 Fire-resistance of building materials and elements / Огнестойкость строительных материалов и элементов91.060.01 Elements of buildings in general / Строительные элементы в целом
Описание
This European Standard specifies a test method for determining the contribution made by applied
reactive fire protection systems to the fire resistance of structural steel members, which can be used
as beams or columns. It considers only sections without openings in the web. It is not directly
applicable to structural tension members without further evaluation. Results from analysis of I or H-
sections are directly applicable to angles, channels and T-sections for the same section factor,
whether used as individual elements or as bracing. This European Standard does not apply to solid
bar or rod.
It covers fire protection systems that involve only reactive materials and not to passive fire protection
materials as defined in this document.
The evaluation is designed to cover a range of thicknesses of the applied fire protection material, a
range of steel sections, characterized by their section factors, a range of design temperatures and a
range of valid fire protection classification periods.
This European Standard contains the fire test procedures, which specifies the tests which should be
carried out to determine the ability of the fire protection system to remain coherent and attached to the
steelwork, and to provide data on the thermal characteristics of the fire protection system, when
exposed to the standard temperature/time curve specified in EN 1363-1.In special circumstances, where specified in National Building Regulations, there can be a need to
subject reactive protection material to a smouldering curve, the test for this and the special
circumstances for its use are described in Annex A.
The fire test methodology makes provision for the collection and presentation of data, which can be
used as direct input to the calculation of fire resistance of steel structural members in accordance with
the procedures given in EN 19 (...ab (...abbreviated)
Diese Europäische Norm legt ein Prüfverfahren zur Ermittlung des Beitrages reaktiver Brandschutzsysteme zur Feuerwiderstandsfähigkeit von Stahlbauteilen, die als Träger oder Stützen eingesetzt werden können, fest. Berücksichtigt werden lediglich Bauteile ohne Öffnungen im Steg. Auf Zugträger ist eine direkte Anwendung nicht ohne eine weitere Beurteilung möglich. Ergebnisse der Analyse von I-oder H-Profilen sind direkt auf Winkelstücke, U-Profile und T-Profile für denselben Profilfaktor anwendbar, wobei sie als Einzelbauteile oder als Verband verwendet werden können. Diese Europäische Norm gilt nicht für Vollstangen oder Rundstäbe.
Diese Europäische Norm bezieht sich auf Brandschutzsysteme, die lediglich aus reaktiven Materialien bestehen, nicht jedoch auf passive Brandschutzmaterialien.
In die Bewertung einbezogen werden verschiedene Schichtdicken des angewendeten Brandschutzmaterials, verschiedene durch ihren Profilfaktor charakterisierte Stahlbauteile, verschiedene Bemessungstemperaturen sowie eine Bandbreite möglicher Feuerwiderstandsdauern.
Diese Europäische Norm beschreibt die Prüfverfahren für die Brandprüfungen, die zur Bestimmung der Formstabilität des Brandschutzsystems und seines Haftvermögens auf Stahlbauteilen sowie zur Ermittlung der thermischen Eigenschaften des Brandschutzsystems bei Beanspruchung unter den Bedingungen der Einheits-Temperaturzeitkurve nach EN 1363-1 durchgeführt werden.
In bestimmten, in den nationalen Bauvorschriften festgelegten Situationen kann es erforderlich sein, reaktive Brandschutzmaterialien mit einer Schwelbrandkurve zu prüfen. Die entsprechende Prüfung und die beson-deren Umstände für ihre Anwendung sind in Anhang A beschrieben.
Mit dem Brandprüfverfahren können Daten erfasst und dargestellt werden, die direkt in die Berechnung der Feuerwiderstandsfähigkeit von Stahlbauteilen nach den in EN 1993-1-2 und EN 1994-1-2 angegebenen Ver-fahren einfließe (...ab (...abgekuerzt)
Ключевые слова:
Stahl,Profilfaktor,Träger,Abbildung,Eigenschaft,Beispiel,Anhang,Stahltemperatur,Analyseverfahren,Berechnung,Literaturhinweis,Prüfverfahren,Bestimmung,Beitrag,Feuerwiderstand,Ummantelung,Stahlbauteil,Baustoff,Brandverhalten,Begriffe,Terminologie,Symbol,Maßeinheit,Prüfgerät,Prüfbedingung,Probekörper,Einbau,Konditionierung,Messgerät,Brandraum,Temperatur,Prüfung,Prüfergebnis,Prüfbericht,Bewertung,Bewertungsbericht,Anwendungsgrenze,Bewertungsergebnis,Schwelbrand,Beanspruchung,Brandschutzmaterial,Material,Thermoelement,Kabelführung,Korrektur,Brandschutzsystem,Stahlprofil,Abmessung,Brandschutz,Warnhinweis,Einheit,Bedeutung,Bezeichnung,Grundsatz,Auswahl