(812) 309-78-59
(495) 223-46-76
ÖNORM EN 13483:2005-07
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
Заменен
Печатная копияПечатное издание
123.60 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
23.040.70 Hoses and hose assemblies / Рукава и рукава в сборе75.200 Petroleum. Including petroleum and natural gas storage devices, distribution systems, pipelines, petrol stations, dispensing devices, etc. / Оборудование для переработки нефтяных продуктов и
Описание
This document specifies the requirements for hose assemblies with vapour recovery for delivery systems on
petrol filling stations.
The hose assemblies with vapour recovery for delivery systems on petrol filling stations shall be capable of
withstanding anticipated mechanical, thermal and chemical stressing and shall be resistant to the combustible
liquids used in these applications as well as their vapour and vapour air mixtures. The assemblies shall be
constructed in such a way that actions during normal operation cannot give rise to dangerous electrostatic
charges nor shall there be any reduction in the performance of the vapour recovery.
The assemblies are intended for use at ambient temperatures between –30 °C and +55 °C for normal
temperature class and –40 °C and +55 °C for low temperature class at a working pressure <= 16 bar1).
Hoses may be constructed from rubber or thermoplastic elastomer (TPE) and this document specifies the
requirements for three types of hoses in two categories and two classes of hose assemblies for measured fuel
dispensing systems, including oxygenated fuels (<= 15 % oxygenated compounds) with internal vapour
recovery tubing or hose.
NOTE This document does not apply to multi chamber fuel dispensing hoses.
Diese Norm legt die Anforderungen an Schläuche und Schlauchleitungen für Zapfsäulen an Tankstellen mit einem innenliegenden Schlauch mit oder ohne Einlage zur Gasrückführung fest. Die Leitungen sind vorgesehen für den Einsatz bei Umgebungstemperaturen zwischen -30 °C und +65 °C und einem Betriebsdruck bis 3,5 bar.
Ключевые слова:
Schlauch,Schlauchleitung,Gasrückführung,Zapfsäule,Tankstelle,Spezifikation,Gummi,Umgebungstemperatur,Betriebsdruck,Druckbereich,Begriffe,Abmessung,Aufbau,Kraftstoffschlauch,Gasschlauch,physikalische Eigenschaft,Werkstoff,elektrische Eigenschaft,Armatur,Kennzeichnung,Prüfhäufigkeit,Druckprüfung,Temperaturbeständigkeit,Längenänderung,Biegeprüfung,Prüfbericht,Terminologie,Elastomer,Elastomerprodukt,Gummischlauch,Kunststoffschlauch,Kunststoffschlauchleitung,Gummischlauchleitung,Zapfstelle,Zapfstellenschlauch,Warnhinweis,Klassifizierung,Eigenschaft,Typprüfung,Abnahmeprüfung,Abbildung,Stabilität,Druckverlust,Haftung,Biegsamkeit,Widerstandsfähigkeit,Brandverhalten,Brandeinwirkung,Entflammbarkeit,Dichtheitsprüfung,Abziehprüfung