(812) 309-78-59
(495) 223-46-76
ÖNORM EN 14211:2012-10
Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence
Действует
Печатная копияПечатное издание
330.88 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
13.040.20 Ambient. Including indoor air / Окружающая атмосфера. Включая воздух внутри помещений
Описание
This European Standard specifies a continuous measurement method for the determination of the concentrations
of nitrogen dioxide and nitrogen monoxide present in ambient air based on the chemiluminescence measuring
principle. This standard describes the performance characteristics and sets the relevant minimum criteria required
to select an appropriate chemiluminescence analyser by means of type approval tests. It also includes the
evaluation of the suitability of an analyser for use in a specific fixed site so as to meet the data quality requirements
as specified in Annex I of Directive 2008/50/EC [1] and requirements during sampling, calibration and quality
assurance for use.
The method is applicable to the determination of the concentration of nitrogen dioxide present in ambient air up to
500 µg/m3. This concentration range represents the certification range for NO2 for the type approval test.
The method is applicable to the determination of the concentration of nitrogen monoxide present in ambient air up
to 1 200 µg/m3. This concentration range represents the certification range for NO for the type approval test.
The method covers the determination of ambient air concentrations of nitrogen dioxide and nitrogen monoxide in
zones classified as rural areas, urban-background areas and traffic-orientated locations and locations influenced by
industrial sources.
The results are expressed in µg/m3 (at 20 °C and 101,3 kPa).
This standard contains information for different groups of users.
Clauses 5 to 7 and Annexes B and C contain general information about the principles of NOx measurement by
chemiluminescence analyser and sampling equipment.
Clause 8 and Annex E are specifically directed towards test houses and laboratories that perform type-approval
testing of NOx analysers. These sections contain information about:
- Type-approval test conditions, test procedures and test requirements;
- Analyser performance requirements;
- Evaluation of the type-approval test results;
- Evaluation of the uncertainty of the measurement results of the NOx analyser based on the type-approval test
results.
Clauses 9 to 11 and Annexes F and G are directed towards monitoring networks performing the practical
measurements of NOx in ambient air. These sections contain information about:
- Initial installation of the analyser in the monitoring network and acceptance testing;
- Ongoing quality assurance/quality control;
- Calculation and reporting of measurement results;
- Evaluation of the uncertainty of measurement results under practical monitoring conditions.
Diese Europäische Norm legt ein kontinuierliches Chemilumineszenz-Messverfahren zur Bestimmung der
Konzentration von Stickstoffdioxid und Stickstoffmonoxid in Luft fest. Es nennt die Leistungskenngrößen und
legt die Mindestanforderungen für die Eignungsprüfung von Chemilumineszenz-Messgeräten fest. Es
beinhaltet auch die Bewertung der Eignung eines Messgeräts für den Einsatz an einem bestimmten ortsfesten
Messstandort bezüglich der Anforderungen an die Datenqualität nach Anhang I der Richtlinie 2008/50/EG [1]
und bezüglich der Anforderungen für Probennahme, Kalibrierung und Qualitätssicherung.
Das Verfahren ist anwendbar zur Bestimmung der Massenkonzentration von Stickstoffdioxid in Außenluft bis
500 µg/m³. Dieser Konzentrationsbereich entspricht dem Zertifizierungsbereich für die Eignungsprüfung.
Das Verfahren ist anwendbar zur Bestimmung der Massenkonzentration von Stickstoffmonoxid in Außenluft
bis 1 200 µg/m³. Dieser Konzentrationsbereich entspricht dem Zertifizierungsbereich für die Eignungsprüfung.
Das Verfahren umfasst die Bestimmung der Konzentration von Stickstoffdioxid und Stickstoffmonoxid an
Standorten, die als ländlich, städtischer Hintergrund, verkehrsbezogen und durch industrielle Quellen
beeinflusst klassifiziert sind.
Die Ergebnisse werden in µg/m³ (bei 20 °C und 101,3 kPa) angegeben.
ANMERKUNG 3 500 µg/m3 an NO2 entsprechen 261 nmol/mol an NO2 bei 20 °C und 101,3 kPa. 1 200 µg/m3 an NO
entsprechen 962 nmol/mol an NO bei 20 °C und 101,3 kPa.
Diese Norm enthält Informationen für verschiedene Nutzergruppen.
Die Abschnitte 5 bis 7 und die Anhänge B und C enthalten allgemeine Informationen über die Grundlagen der
NOx-Messung mit einem Chemilumineszenz-Messgerät sowie über die Probennahmeeinrichtung.
Abschnitt 8 und Anhang E richten sich speziell an Prüfinstitute und -laboratorien, die Eignungsprüfungen von
NOx-Messgeräten durchführen. Diese Abschnitte enthalten Informationen über
- Prüfbedingungen, -verfahren und -anforderungen bei der Eignungsprüfung;
- Anforderungen an die Leistungsfähigkeit des Messgeräts;
- die Bewertung der Ergebnisse der Eignungsprüfung;
- die Bewertung der Unsicherheit der Messergebnisse des NOx-Messgeräts anhand der Eignungsprüfungsergebnisse.
Die Abschnitte 9 bis 11 und die Anhänge F und G richten sich an die Betreiber von Messnetzen, mit denen
NOx-Messungen in Luft durchgeführt werden. Diese Abschnitte enthalten Informationen über
- die Erstinstallation des Messgeräts im Messnetz und Eignungsbewertung;
- die laufende Qualitätssicherung und -kontrolle;
- die Berechnung und Übermittlung der Messergebnisse;
- die Bewertung der Unsicherheit der Messergebnisse unter Messbedingungen.
Ключевые слова:
Luftreinhaltung, Außenluft, Messverfahren, Bestimmung, Konzentration, Stickstoffdioxid, Stickstoffmonoxid, Chemilumineszenz, Begriffe, Terminologie, Messgerät, Eignungsanerkennung von Messgeräten, Feldbetrieb, Laufende Qualitätskontrolle, Angabe der Ergebnisse, Prüfbericht, Dokumentation