(812) 309-78-59
(495) 223-46-76
ÖNORM EN 14471:2014-01
Chimneys - System chimneys with plastic flue liners - Requirements and test methods
Заменен
Печатная копияПечатное издание
195.84 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
91.060.40 Chimneys,. Including flues and flue pipes / Дымовые трубы, шахты, каналы. Включая дымоходы и вытяжные трубы
Описание
This European Standard specifies the performance requirements and test methods for system chimneys with plastic flue liners used to convey the products of combustion from appliances to the outside atmosphere under dry and wet conditions. It also specifies the requirements for marking, manufacturer's instructions and evaluation of conformity.
This European Standard describes chimney components from which system chimneys can be assembled.
This European Standard is not applicable to chimneys with sootfire resistance classification class G.
This European Standard is not applicable for chimneys with the following classification:
- corrosion resistance class 2 concerning natural wood1);
- corrosion resistance class 3;
- pressure class N2.
This European Standard is applicable to chimneys designed so that no condensate accumulation can occur, e.g. with a minimum inclination of 3° to the horizontal.
This European Standard is not applicable
- for system chimneys with plastic coated flue liners;
- to structurally independent (free-standing or self-supporting) chimneys.
Chimneys with components which need further processing during the installation to reach the final material properties are no system chimneys and therefore also not covered by this standard. This European Standard does not cover the requirements for horizontal terminals (as defined for C1
installation types in CEN/TR 1749) regarding aerodynamic behaviour, rainwater ingress and icing behaviour.
Diese Europäische Norm legt Anforderungen und Prüfungen für Systemabgasanlagen mit Kunststoffinnenrohren zur Abführung von Verbrennungsprodukten aus Feuerstätten ins Freie bei trockener und feuchter Betriebsweise fest. Diese Norm beinhaltet auch Festlegungen für die Kennzeichnung, An-leitungen des Herstellers und Bewertung und Überprüfung der Konformität.
Diese Europäische Norm beschreibt Bauteile, aus denen die Systemabgasanlage bestehen kann.
Diese Europäische Norm gilt nicht für rußbrandbeständige Abgasanlagen der Klasse G.
Diese Europäische Norm gilt nicht für Abgasanlagen mit folgenden Klassen:
- Korrosionswiderstandsklasse 2 bezüglich Naturholz1);
- Korrosionswiderstandsklasse 3;
- Druckklasse N2.
Diese Europäische Norm gilt für Abgasanlagen, bei denen keine Kondensatansammlung erfolgt, z. B. mit einer Steigung von mindestens 3° gegenüber der Horizontalen.
Diese Europäische Norm gilt nicht:
- für Abgasanlagen mit kunststoffbeschichteten Innenrohren;
- für bauseits unabhängige Abgasanlagen (freistehende oder selbsttragende Abgasanlagen).
Abgasanlagen mit Bauteilen, die notwendige Werkstoffeigenschaften erst nach einer weiteren Behandlung während des Einbaus erreichen, sind keine Systemabgasanlagen und werden in der vorliegenden Norm nicht erfasst.
In dieser Europäischen Norm ebenfalls nicht erfasst werden Anforderungen an horizontale Aufsätze (festgelegt für Gasgeräte vom Typ C1 in CEN/TR 1749) bezüglich ihres aerodynamischen Verhaltens, dem Eindringen von Regenwasser und dem Vereisungsverhalten.
Ключевые слова:
Rauchfang,Abgasfang,Abgasanlage,Systemabgasanlage,Kunststoffinnenrohr,Anforderung,Prüfungen,Verbrennungsprodukt,Begriffe,Terminologie,Maße,Abweichung,Prüfung,Produktinformation,Konformitätsbewertung,Kennzeichnung,Beschilderung,Bestimmung von Werkstoffeigenschaften