(812) 309-78-59
(495) 223-46-76
ÖNORM EN 15991:2016-03
Testing of ceramic and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by inductively coupled plasma optical emission spectrometry (ICP OES) with electrothermal vaporisation (ETV)
Действует
Печатная копияПечатное издание
175.43 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
81.060.10 Raw materials / Сырье
Описание
This European Standard defines a method for the determination of the trace element concentrations of Al, Ca, Cr, Cu, Fe, Mg, Ni, Ti, V and Zr in powdered and granular silicon carbide.
Dependent on element, wavelength, plasma conditions and weight, this test method is applicable for mass contents of the above trace contaminations from about 0,1 mg/kg to about 1 000 mg/kg, after evaluation also from 0,001 mg/kg to about 5 000 mg/kg.
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Gehalte der Spurenelemente Al, Ca, Cr, Cu, Fe, Mg, Ni, Ti, V und Zr in pulver- und kornförmigem Siliciumcarbid fest.
Das festgelegte Prüfverfahren gilt in Abhängigkeit von Element, Wellenlänge, Plasmabedingungen und Einwaage für Massenanteile der o. g. Spurenverunreinigungen von etwa 0,1 mg/kg bis etwa 1 000 mg/kg, nach Prüfung auch von 0,001 mg/kg bis etwa 5 000 mg/kg.
Ключевые слова:
Pulverform, Spektrometrie, Siliciumcarbid, Emissionsspektrometrie, Plasma, Verdampfung, feuerfestes Erzeugnis, Kornform, Kurzbeschreibung, ETV-Gasführung, Transportrohr, Gerät, Reagenz, Hilfsmittel, Probenahme, Probenvorbereitung, Kalibrierung, Durchführung, Wellenlänge, Arbeitsbericht, Analyse, Berechnung, Ergebnis, Auswertung, Prüfbericht, Ringversuch, Präzisionsdaten, Grafit, Störungsbehebung, Referenzmaterial, Prüfung, keramischer Werkstoff, keramischer Rohstoff, Werkstoff, Rohstoff, Keramik, Massenanteil, Spurenverunreinigung