(812) 309-78-59
(495) 223-46-76
ÖNORM EN 16809-2:2017-03
Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 2: Specification for the bonded and loose-fill products after installation
Действует
Печатная копияПечатное издание
150.53 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
91.100.60 Thermal and sound insulating materials / Тепло- и звукоизоляционные материалы
Описание
This European Standard specifies the requirements for products of loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads installed in masonry cavity walls and frame constructions.
This European Standard is a specification for the installed insulation products.
This European Standard describes, when taken together with EN 16809-1, the product characteristics that are linked to the essential requirements of the Regulation (EU) 305/2011. It also specifies the checks and tests to be used for the declarations made by the installer of the product and the rules for the evaluation of conformity.
This European Standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards. For example, see the note in the scope of EN 16809-1 regarding the possibility of special water penetration tests in different Member States.
Products with a declared thermal conductivity at 10 °C greater than 0,060 W/(m·K) are not covered by this standard.
This European Standard does not cover factory made expanded polystyrene products in the form of mats, batts, rolls or boards.
This European Standard does not cover products intended for airborne sound insulation and for acoustic absorption applications.
Diese Europäische Norm legt die Anforderungen an Produkte aus losen expandierten Polystyrolkugeln (EPS) und gebundenen expandierten Polystyrolkugeln fest, die an der Verwendungsstelle in zweischaliges Mauerwerk und Rahmenkonstruktionen eingebracht werden.
Diese Europäische Norm ist eine Spezifikation für die eingebauten Wärmedämmstoffe.
Diese Europäische Norm beschreibt in Verbindung mit EN 16809-1 die Produkteigenschaften, die mit den wesentlichen Anforderungen der Verordnung (EU) Nr. 305/2011 im Zusammenhang stehen. Sie legt außerdem sowohl die Überprüfungen und Prüfungen, die für die vom Verarbeiter des Produktes abzugebende Erklärung anzuwenden sind, als auch die Festlegungen zur Konformitätsbewertung fest.
Diese Europäische Norm legt keine Anforderungsstufen für eine bestimmte Eigenschaft fest, die ein Produkt erreichen muss, um für einen bestimmten Anwendungszweck gebrauchstauglich zu sein. Derartige Anforderungsstufen für einen bestimmten Anwendungsfall sind Regelwerken oder nicht entgegenstehenden Normen zu entnehmen. Siehe zum Beispiel die Anmerkung im Anwendungsbereich von EN 16809-1 zur Möglichkeit besonderer Wassereintrittsprüfungen in verschiedenen Mitgliedstaaten.
Produkte mit einem Nennwert der Wärmeleitfähigkeit von mehr als 0,060 W/(m·K) bei 10 °C werden von diesem Dokument nicht abgedeckt.
Diese Europäische Norm gilt nicht für werksmäßig hergestellte Produkte aus expandiertem Polystyrol in Form von Matten, Mattenteilen, Rollen oder Platten.
Diese Europäische Norm gilt nicht für Produkte für die Anwendung zur Luftschalldämmung und Schallabsorption.
Ключевые слова:
Wärmedämmstoff, Gebäude, lose expandierte Polystyrolkugel, EPS, gebundene Polystyrolkugel, Schüttdämmstoff, Einblasdämmstoff, Dämmstoff, Wärmeschutz, Schallschutz, Rahmenkonstruktion, EU-Bauproduktrichtlinie, Überprüfung, Prüfung, Konformitätsbewertung, Wassereintrittsprüfung, Wärmeleitfähigkeit, Begriffe, Prüfverfahren, Konditionierung, Zweischaliges Mauerwerk, Hohlraumbreite