(812) 309-78-59
(495) 223-46-76
ÖNORM EN 4660-003:2011-08
Aerospace series - Modular and Open Avionics Architectures - Part 003: Communications/Network
Заменен
Печатная копияПечатное издание
173.63 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
49.090 On-board. Including navigation instruments and telecommunications equipment / Бортовое оборудование и приборы. Включая навигационные приборы и телекоммуникационное оборудование
Описание
This standard details the functionality and principle interfaces for the ASAAC (Allied Standard Avionics
Architecture Council) Network to ensure the interoperability of Common Functional Modules and design
guidelines to assist in implementation of such a network. It is one of a set of standards that define an ASAAC
Integrated Modular Avionics (IMA) System.
The purpose of this standard is to establish by means of well defined interfaces and functionality, a network
design that is technology transparent, that is open to a multi-vendor market and that can make the best use of
Commercial Off The Shelf (COTS) technologies. Therefore, the associated data communication network
topology, protocols and technologies are not identified in this document. For these items the document
identifies the issues that should be considered when defining a specific network implementation to support the
ASAAC architecture and provides guidelines to assist.
Although the physical organisation and implementation of the network shall remain the System Designers
choice, in accordance with the best use of the current technology, it is necessary to define interfaces and
parameter sets in order to achieve a logical definition of the network with a defined functionality. This definition
includes:
-The generic functionality applicable to all networks.
-The logical interfaces to the Operating System and Module Support Layers.
-The physical interfaces to the Common Functional Modules (CFM).
The ASAAC Standards are intended to be independent of specific technologies, including network
technologies. This document identifies the principle interfaces for the Network, in Clause 4, and where
appropriate, provides requirements on network parameters to be defined. The interfaces relevant to the
network are the Module Support Layer to Operating System (MOS), Module Physical Interface (MPI) and
Module Logical Interface (MLI). The MOS and MPI are generically defined elsewhere (Standards for Software
see EN 4660-005 and Packaging see EN 4660-004). The MLI is clearly a function of the selected network.
The MOS and MPI definitions are generic and will need to be supported by network specific information.
There is no network-dependent information in the Software or Packaging standards. So a future network
specification will not only define the particular MLI, but will also need to define the specific aspects of the MPI,
topologies, system properties etc.
Diese Norm behandelt die Funktionalität und die Hauptschnittstellen für das ASAAC-Netzwerk, mit denen die
Interoperabilität von Standardfunktionsmodulen (CFM) sichergestellt werden soll; darüber hinaus enthält sie
Entwurfsleitlinien zur Unterstützung bei der Implementierung eines derartigen Netzwerks. Sie ist Teil einer
Reihe von Normen, die ein integriertes modulares Avioniksystem (IMA) definieren, das den Vorgaben des
ASAAC-Standards entspricht.
Zweck dieses Dokuments ist es, mittels wohl definierter Schnittstellen und Funktionalitäten einen Netzwerkentwurf
festzulegen, der technologisch transparent und für einen Markt mit einer Vielzahl von Herstellern offen
ist und COTS-Technologien am wirkungsvollsten nutzen kann. Daher sind die zugehörigen Topologien, Protokolle
und Technologien des Datenkommunikationsnetzes in diesem Dokument nicht benannt. Stattdessen
werden die Aspekte vorgestellt, die bei der Definition einer spezifischen Netzwerkimplementierung, die die
ASAAC-Architektur unterstützen soll, berücksichtigt werden sollten, und es sind entsprechende Leitlinien als
Hilfe angegeben.
Obwohl die physikalische Organisation und Implementierung des Netzwerks dem Systemplaner überlassen
bleiben muss, ist es im Sinne der wirkungsvollsten Nutzung der derzeitigen Technologien notwendig, Schnittstellen
und Parametersätze zu definieren, um eine logische Definition des Netzwerks mit einer definierten
Funktionalität zu erhalten: Die Definition umfasst:
- die für alle Netzwerke geltende generische Funktionalität;
- die logischen Schnittstellen zum OS und zu den MSL;
- die physikalischen Schnittstellen zu den CFM.
Die ASAAC-Standards sollen von spezifischen Technologien, einschließlich Netzwerktechnologien, unabhängig
sein. Das vorliegende Dokument benennt in Abschnitt 4 die Hauptschnittstellen für das Netzwerk und gibt
gegebenenfalls Anforderungen an die zu definierenden Netzwerkparameter an. Die für das Netzwerk maßgebenden
Schnittstellen sind die Schnittstelle zwischen Modulunterstützungsschicht/Betriebssystem (MOS),
die physikalische Modulschnittstelle (MPI) und die logische Modulschnittstelle (MLI). Eine generische Definition
von MOS und MPI findet sich an anderer Stelle (siehe Standard für Software in EN 4660-005 und Standard
für Paketierung in EN 4660-004). Die MLI ist eindeutig vom gewählten Netzwerk abhängig. Die Definition
von MOS und MPI ist generisch und bedarf einer Unterstützung durch netzwerkspezifische Informationen. Die
Standards für Software und Paketierung enthalten keine netzwerkabhängigen Informationen. Eine zukünftige
Netzwerkspezifikation wird also nicht nur die jeweilige MLI definieren, sondern auch eine Definition der
spezifischen Aspekte der MPI, der Topologien, Systemeigenschaften usw. bieten müssen.
Ключевые слова:
Luftfahrt, Raumfahrt, Avionikarchitektur, Kommunikation, Netzwerk, Vorwort, Anwendungsbereich, Begriffe, Abkürzung, Netzwerkdefinition, Erörterung, Abbildung, Hierarchie, Tabelle, Systemanforderung, Softwaremodell, Kommunikationsmodell