(812) 309-78-59
(495) 223-46-76
ÖNORM EN 998-1:2010-11
Specification for mortar for masonry - Part 1: Rendering and plastering mortar
Заменен
Печатная копияПечатное издание
100.56 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
91.100.10 Cement. Gypsum. Lime. Mortar / Цемент. Гипс. Известь. Строительный раствор
Описание
This European Standard is applicable to factory made rendering/plastering mortar based on inorganic
binders for external (rendering) and internal (plastering) use on walls, ceilings, columns and partitions.
It contains definitions and final performance requirements.
It does not cover mortars where calcium sulphate binder is the principle active binding agent.
Calcium sulphate binder can be used as an additional binder together with air lime. If air lime is the
principle active binding component, the rendering/plastering mortar is covered by this European
Standard. If the calcium sulphate binder is the principle active binding component, the mortar is
covered by EN 13279. The classification is carried out by the producer of the mortar.
Special fire resistant- and acoustical mortars, mortars for structural repair and surface treatments of
building elements such as materials for smoothing or trueing, paints, coatings, thin-layer organic
renders/plasters and prefabricated units (e.g. plaster boards) are not dealt with in this European
Standard.
This European Standard covers rendering/plastering mortars defined in Clause 3 with the exception of
site made rendering/plastering mortars. However, this European Standard or part of this European
Standard may be used in conjunction with codes of application and national specifications covering
site made mortars.
Diese Europäische Norm gilt für im Werk hergestellten Putzmörtel aus anorganischen Bindemitteln, die als
Außenputz und als Innenputz für Wände, Decken, Pfeiler und Trennwände verwendet werden. Sie enthält
Definitionen und Leistungsanforderungen.
Diese Europäische Norm gilt nicht für Mörtel, deren Hauptbindemittel Gips ist.
Gips kann als zusätzliches Bindemittel mit Luftkalk verwendet werden. Wenn Luftkalk das Hauptbindemittel ist,
ist der Putzmörtel durch diese Europäische Norm erfasst. Wenn Gips das Hauptbindemittel ist, wird der Mörtel
durch EN 13279 abgedeckt. Die Klassifizierung ist vom Hersteller des Putzmörtels vorzunehmen.
Brandschutzmörtel und Akustikputzmörtel, Mörtel zur Instandhaltung und zur Oberflächenbehandlung von
Bauteilen wie Ausgleichsmassen, Anstriche, Beschichtungen, organische Putze, die in dünnen Schichten
aufgetragen werden, und vorgefertigte Elemente (z. B. Gipsplatten) sind nicht Gegenstand dieser Europäischen
Norm.
Diese Europäische Norm gilt für Putzmörtel nach Abschnitt 3 mit Ausnahme von Baustellenmörtel. Diese
Europäische Norm oder Teile davon können jedoch im Zusammenhang mit Anwendungsvorschriften und
nationalen Normen auch für Baustellenmörtel angewendet werden.
Ключевые слова:
Mauerwerksbau,Mauerwerk,Mörtel,Putzmörtel,Wand,Produkt,Konstruktion,Putz,Decke,Pfeiler,Trennwand,Verweisung,Begriffe,Terminologie,Abkürzung,Ausgangsstoff,Eigenschaft,Eignung,Festmörtel,Brandverhalten,Kategorie,Wert,Zusammenfassung,Prüfparameter,Prüfverfahren,Normalputzmörtel,Leichtputzmörtel,Edelputzmörtel,Einlagenputzmörtel,Sanierputzmörtel,Wärmedämmputzmörtel,Konformitätsbescheinigung,CE-Kennzeichnung,Beispiel,Abbildung,Literaturhinweis,Frischmörtel,Bezeichnung,Kennzeichnung,Etikettierung,Konformitätsbewertung,Produktionskontrolle,Prüfung,Prüfgerät,Lieferung