(812) 309-78-59
(495) 223-46-76
ÖNORM EN ISO 10370:2015-06
Petroleum products - Determination of carbon residue - Micro method (ISO 10370:2014)
Действует
Печатная копияПечатное издание
129.89 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
75.080 Petroleum products in general / Нефтяные продукты в целом
Описание
This International Standard specifies a method for the determination of the amount of carbon residue, in the range 0,10 % (m/m) to 30,0 % (m/m), left after evaporation and pyrolysis of petroleum products
under specified conditions.
For products which yield a residue in excess of 0,10 % (m/m), the test results are equivalent to those obtained by the Conradson carbon residue test (see ISO 6615) in the range of 0,10 (m/m) to 25,0 (m/m).
This International Standard is also applicable to petroleum products which consist essentially of distillate material, and which may yield a carbon residue below 0,10 % (m/m). On such materials, a
10 % (V/V) distillation residue is prepared by the procedure described in 7.3.1 and 7.3.2 before analysis.
Both ash-forming constituents, as defined by ISO 6245 and non-volatile additives present in the sample add to the carbon residue value and are included in the total value reported.
Diese Internationale Norm legt ein Verfahren zur Bestimmung der Koksrückstandsmenge im Bereich von 0,10 % (m/m) bis 30,0 % (m/m) fest, die nach einer Verdampfung und Pyrolyse von Mineralölerzeugnissen unter festgelegten Bedingungen übrig bleibt.
Für Erzeugnisse mit einer Rückstandsmenge von mehr als 0,10 % (m/m) sind die Prüfergebnisse gleich denen, die mittels Conradson-Verfahren zur Bestimmung des Koksrückstands (siehe ISO 6615) im Bereich von 0,10 % (m/m) bis 25,0 % (m/m) erhalten werden.
Diese Internationale Norm gilt auch für Mineralölerzeugnisse, die hauptsächlich aus Destillaten bestehen und die einen Koksrückstand unter 0,10 % (m/m) aufweisen können. Bei diesen wird vor der Analyse mittels dem in 7.3.1 und 7.3.2 beschriebenen Verfahren ein Destillationsrückstand von 10 % (V/V) hergestellt.
Sowohl aschebildende Komponenten nach ISO 6245 als auch in der Probe vorhandene nichtflüchtige Additive tragen zum Koksrückstandswert bei und sind im berichteten Gesamtwert enthalten.
Ключевые слова:
Erdölprodukt, Mineralölerzeugnis, Bestimmung des Koksrückstandes, Mikroverfahren, Begriffe, Terminologie, Chemikalien und Prüfmittel, Probenvorbereitung, Umfüllen der Probe, Berechnung, Angabe der Ergebnisse, Präzision, Koksrückstand, synthetisches Substitutionsprodukt, pflanzliches Substitutionsprodukt, Verdampfung, Pyrolyse, Conradson-Verfahren