Water quality - Guidance for the preparation and treatment of poorly water-soluble organic compounds for the subsequent evaluation of their biodegradability in an ....(abbreviated)
Заменен
Печатная копияПечатное издание
111.55 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
13.060.70 Examination of biological properties of water / Исследование биологических свойств воды
Описание
This International Standard describes four techniques for preparing poorly water-soluble organic compounds and introducing them into test vessels for a subsequent test on biodegradability in an aqueous medium using Standard methods. The test compounds concerned are not sufficiently soluble in water to perform the biodegradability tests in the normal manner, as described in the respective test methods indicated in clause 2. The preparation techniques are as follows: - direct addition (clause 3): this technique is restricted to non-volatile test compounds if inert supports or solvents are used; - ultrasonic dispersion (clause 4): this technique may be applied to non-volatile liquid and solid compounds; - adsorption on an inert support (clause 5); - dispersions or emulsions with an emulsifying agent (clause 6). The subsequent tests on biodegradability are primarily methods using the analysis of the released carbon dioxide (see ISO 9439) and the determination of the Oxygen consumption (see ISO 9408). This International Standard does not describe the test methods; it is restricted to describing the techniques for introducing the test substances into the test medium and to keep them in a dispersed state. These techniques are implemented while observing the experimental conditions described in the standardized methods for evaluating biodegradability. lt should be noted that volatile chemicals may not be tested by the carbon dioxide method specified in ISO 9439. Diese ÖNORM beschreibt vier Techniken zum Verteilen von organischen Produkten, welche für Abbaubarkeitsprüfungen in wässrigem Medium bestimmt und welche nicht genügend löslich sind, um die Prüfungen in der üblichen Weise durchzuführen: - direkter Zusatz: diese Technik ist beschränkt auf nicht-flüchtige Prüfsubstanzen; - Ultraschall-Dispersion: diese Methode kann bei flüssigen Substanzen und solchen mit niedrigem Schmelzpunkt, alle nicht-flüchtig, angewendet werden; - Adsorption auf einem inerten Medium; - Dispersion mit einem emulgierenden Agens.