(812) 309-78-59
(495) 223-46-76
ÖNORM EN ISO 1172:1999-01
Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996)
Действует
Печатная копияПечатное издание
129.89 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
83.120 Reinforced plastics / Армированные пластмассы
Описание
This International Standard specifies two calcination methods for the determination of the textile-glass and mineralfilier
content of glass-reinforced plastics:
Method A: for the determination of the textile-glass content when no mineral fillers are present.
Method B: for the determination of the textile-glass and mineral-filler content when both components are
present.
This International Standard is applicable to the following types of material:
- prepregs made from yarns, rovings, tapes or fabrics;
- SMC, BMC and DMC moulding compounds;
- textile-glass-reinforced thermoplastic moulding materials and granules;
- filled or unfilled textile-glass laminates made with thermosetting or thermoplastic resins.
The methods are not applicable to the following types of reinforced plastic:
- those containing reinforcements other than textile glass;
- those containing materials which do not completely burn off at the test temperature (for example, those based
on Silicone resin);
- those containing mineral fillers which degrade at temperatures below the minimum calcination temperatute.
For these materials, ISO 1 1667, Fibre-reinforced plastics - Maulding compounds and prepregs - Determination
of resin, reinforcement-fibre and mineral-filler content - Dissolution method, may be used.
Diese Norm legt zwei Kalzinierverfahren zur Bestimmung des Textilglas- und Mineralfüllstoffgehaltes von glasfaserverstärkten Kunststoffen fest: Verfahren A zur Bestimmung des Textilglasgehalts, falls keine Mineralfüllstoffe vorhanden sind; Verfahren B zur Bestimmung des Textilglas- und Mineralfüllstoffgehalts, wenn beide Bestandteile vorhanden sind. Die Norm ist auf folgende Materialarten anwendbar: Prepregs aus Fäden, Rovings, Bändern oder Geweben; SMC-, BMC- und DMC-Formmassen; glasfaserverstärkte thermoplastische Formmassen und Granulate; gefüllte und ungefüllte Textilglaslaminate aus wärmehärtbaren oder thermoplastischen Harzen. Die Verfahren sind auf folgende Arten von verstärkten Kunststoffen nicht anwendbar: verstärkte Kunststoffe mit anderen Verstärkungsmaterialien als Textilglas; verstärkte Kunststoffe, die Materialien enthalten, die bei der Prüftemperatur nicht vollständig verbrennen (zB Kunststoffe auf Silikonharzbasis); verstärkte Kunststoffe mit Mineralfüllstoffen, die sich bei Temperaturen unter der Mindestkalziniertemperatur zersetzen.
Ключевые слова:
Kunststoff, glasfaserverstärkt, glasfaserverstärkter Kunststoff, Prepreg, Formmasse, Laminat, Textilglasgehalt, Mineralfüllstoffgehalt, Kalzinierverfahren, Probekörper, Probenahme, Gehaltsbestimmung, Prüfgerät, Auswertung, Reagenzien, Chemikalie, Prüfbericht