(812) 309-78-59
(495) 223-46-76
ÖNORM EN ISO 15181-6:2014-08
Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 6: Determination of tralopyril release rate by quantitation of its degradation product in the extract (ISO 15181-6:2012)
Действует
Печатная копияПечатное издание
150.53 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
87.040 Paints. Including coating powders, paint coatings and protective paint systems / Краски и лаки. Включая порошки для нанесения покрытий, лакокрасочные покрытия и системы защитной окраски
Описание
This part of ISO 15181 specifies a method for determining the amount of tralopyril that has been released
from an antifouling paint into artificial seawater in accordance with the procedure given in ISO 15181-1.
Tralopyril is unstable in water and degrades hydrolytically to form 3-bromo-5-(4-chlorophenyl)-4-cyano-
1H-pyrrole-2-carboxylic acid (BCCPCA). This part of ISO 15181 specifies a method for accelerating the
conversion of the released tralopyril into this degradation product by heat treatment and quantifying
the concentration of the BCCPCA degradation product in the artificial seawater extract, and gives the
final calculation for the release rate of tralopyril under the specified laboratory conditions.
This part of ISO 15181 is designed to allow the concurrent determination of tralopyril and other biocides
that can be released by a given antifouling paint (for example, zineb) through the analysis of separate
sub-samples of an artificial seawater extract generated in accordance with ISO 15181-1.
Dieser Teil von ISO 15181 legt ein Verfahren zum Bestimmen der Menge an Tralopyril fest, die nach dem in ISO 15181-1 angegebenen Verfahren aus einer Antifouling-Beschichtung in künstliches Meerwasser ausgewaschen wurde.
Tralopyril ist unbeständig in Wasser und baut hydrolytisch unter Bildung von 3-Brom-5-(4-chlorphenyl)-4-cyan-1H-pyrrol-2-carbonsäure (BCCPCA) ab. Dieser Teil von ISO 15181 legt ein Verfahren zur Beschleunigung der Umsetzung des ausgewaschenen Tralopyrils in dieses Abbauprodukt durch Wärmebehandlung zur quantitativen Bestimmung der Konzentration des BCCPCA-Abbauproduktes in dem künstlichen Meerwasserextrakt und zur abschließenden Berechnung der Auswaschrate von Tralopyril unter den festgelegten Laborbedingungen fest.
Dieser Teil von ISO 15181 ist so formuliert, dass die gleichzeitige Bestimmung von Tralopyril und anderen Bioziden (z. B. Zineb), die aus einer gegebenen Antifouling-Beschichtung ausgewaschen werden können, ermöglicht wird, indem getrennte Teilproben des künstlichen, nach ISO 15181-1 hergestellten Meerwasserextrakts analysiert werden.
Ключевые слова:
Beschichtungsstoffe, Bestimmung, Auswaschrate, Biozide, Antifouling-Beschichtung, Tralopyril, Quantifizierung, Abbauprodukt, Extrakt