(812) 309-78-59
(495) 223-46-76
ÖNORM EN ISO 22391-3:2010-08
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings (ISO 22391-3:2009)
Заменен
Печатная копияПечатное издание
150.53 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
23.040.45 Plastics fittings / Пластмассовые фитинги91.140.60 Water. Including water meters in buildings / Системы водоснабжения. Включая счетчики воды в зданиях
Описание
This part of ISO 22391 specifies the characteristics of fittings for piping systems made of
⎯ polyethylene of raised temperature resistance (PE-RT), Type I, and
⎯ polyethylene of raised temperature resistance (PE-RT), Type II,
intended to be used for hot and cold water installations within buildings for the conveyance of water, whether
or not the water is intended for human consumption (domestic systems) and for heating systems, under the
design pressures and temperatures appropriate to the class of application according to ISO 22391-1.
This part of ISO 22391 covers a range of service conditions (classes of application), design pressures and
pipe dimension classes, and also specifies test parameters and test methods. In conjunction with the other
parts of ISO 22391, it is applicable to fittings made of PE-RT, as well as to those made of other materials,
intended to be fitted to pipes conforming to ISO 22391-2 for hot and cold water installations, the joints of which
are in accordance with ISO 22391-5.
This part of ISO 22391 is applicable to the following types of fitting:
- mechanical fittings;
- socket fusion fitting;
- electrofusion fittings;
- fittings with incorporated inserts.
It is not applicable to values of design temperature, maximum design temperature or malfunction temperature
in excess of those specified in ISO 22391-1.
Dieser Teil von ISO 22391 legt die Eigenschaften von Formstücken für Rohrleitungssysteme aus
⎯ Polyethylen erhöhter Temperaturbeständigkeit (PE-RT), Typ I und
⎯ Polyethylen erhöhter Temperaturbeständigkeit (PE-RT), Typ II
fest, die in der Warm- und Kaltwasserinstallation innerhalb von Gebäuden für den Transport von Wasser ¿
Trink- oder Brauchwasser (Hausinstallation) und für Heizungsanlagen ¿ bei festgelegten zulässigen
Betriebsdrücken und -temperaturen entsprechend der jeweiligen Anwendungsklasse nach ISO 22391-1
eingesetzt werden.
Dieser Teil von ISO 22391 enthält eine Reihe von Betriebsbedingungen (Anwendungsklassen), zulässigen
Betriebsdrücken und Rohrabmessungsklassen und legt auch Prüfparameter und Prüfverfahren fest. Wird
dieser Teil der Norm gemeinsam mit den anderen Teilen von ISO 22391 angewendet, gilt er entsprechend für
Formstücke aus PE-RT sowie für Formstücke aus anderen Werkstoffen, die mit Rohren nach ISO 22391-2,
die für die Warm- und Kaltwasserinstallation vorgesehen sind, und deren Verbindungen ISO 22391-5
entsprechen, verbunden werden sollen.
Dieser Teil von ISO 22391 gilt für die folgenden Arten von Formstücken:
- mechanische Rohrverbinder;
- Formstücke für Muffenschweißung;
- Formstücke für Heizwendelschweißung;
- Formstücke mit integrierten Einsätzen.
Er gilt nicht, wenn die Werte für die Berechnungstemperatur, die maximale Berechnungstemperatur oder die
Störfalltemperatur die in ISO 22391-1 festgelegten Werte überschreiten.
Ключевые слова:
Kunststoff, Rohrleitungssystem, Warmwasserinstallation, Kaltwasserinstallation, Polyethylen, Temperaturbeständigkeit, Formstück, Rohr, Flüssigkeit, Gas, Eigenschaft, Begriffe, Terminologie, Symbol, Abkürzung, Werkstoff, Abbildung, Muffe, Abmessung, Anwendungsklasse, Chemie, Dichtmittel, Kennzeichnung, Angabe