(812) 309-78-59
(495) 223-46-76
ÖNORM EN ISO 28199-2:2010-02
Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling (ISO 28199-2:2009)
Заменен
Печатная копияПечатное издание
129.89 € (включая НДС 20%)
Разработчик:
Зарубежные/ON
ICS:
87.040 Paints. Including coating powders, paint coatings and protective paint systems / Краски и лаки. Включая порошки для нанесения покрытий, лакокрасочные покрытия и системы защитной окраски
Описание
ISO 28199 provides a method for the evaluation of coating materials in research, development and production with regard to their suitability and safety for industrial processes, and error analysis. The properties of coating materials and coatings to be evaluated depend on the film thickness, so a coating system of increasing thickness is applied to a test panel under defined conditions. The following characteristics are measured (in ISO 28199-1): film thickness in accordance with ISO 2808; surface texture; colour in accordance with ISO 7724 (all parts). In combination with visual assessment, the following properties are determined: colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling (this part of ISO 28199); tendency to sagging, formation of bubbles, pinholing and hiding power (ISO 28199-3). This part of ISO 28199 specifies methods for the determination of colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling of coating materials applied to a test panel under defined conditions.
ISO 28199 legt ein Verfahren zum Beurteilen von Beschichtungsstoffen in Forschung, Entwicklung und Produktion bezüglich ihrer Prozesseignung, Prozesssicherheit und Fehleranalyse fest. Die zu beurteilenden Eigenschaften von Beschichtungsstoffen und Beschichtungen sind abhängig von der Schichtdicke. Hierzu wird unter definierten Bedingungen ein Beschichtungssystem mit ansteigender Schichtdicke auf eine Probenplatte aufgetragen. Es werden folgende Prüfmerkmale gemessen: - Schichtdicke nach ISO 2808; - Oberflächenstruktur; - Farbe nach ISO 7724; - Glanz nach ISO 2813 (optional). Daraus werden in Verbindung mit einer visuellen Beurteilung folgende Eigenschaften bestimmt: - Farbstabilität, Prozessdeckvermögen, Spritznebelaufnahme, Wolkigkeit, Oberflächenstruktur, Benetzung; - Ablaufneigung, Kocherbildung, Nadelstichbildung, Deckvermögen. Dieser Teil von ISO 28199 legt die Bestimmung von Farbstabilität, Prozessdeckvermögen, Spritznebelaufnahme, Wolkigkeit, Oberflächenstruktur und Benetzung fest.
Ключевые слова:
Beschichtung, Beschichtungsstoff, Beschichtungssystem, Applikation, Eigenschaft, Farbstabilität, Prozessdeckvermögen, Benetzung, Oberflächenstruktur, Entwicklung, Fehleranalyse, Messwert, Anlösen, Spritznebelaufnahme, Abbildung, Wolkigkeit, Lack, Klarlack, Anstrichstoff, Prozessuntergrund, Verfahren